Loading ...
Loading ...
Loading ...
IL
iiiii!!i!i!iim ii i
÷
OPERATION
OvenControl,ClockandTimer
Your new control has a series of
tones that will sound at different times.
These tones may sound while you set
the control for an oven function, or at
the end of the oven function. It will
also alert you that there may be a
problem with the functions. Below
are the types of tones and a brief
description of each
TONES WHILE SE'n'ING THE
CONTROL - When you press a touch
pad you will hear a beep. This beep
will let you know you have placed
enough pressure on the pad to
activate it (The arrow pads do
not beep.)
END OF TIMED CYCLE TONE At
the end of atimed cooking function,
you will hear 3short beeps followed
by 1 beep every 6 seconds. This
6-second beep will continue to sound
until the CLEAR/OFF pad is pressed
or you may select the special feature
to cancel this 6-second beep from
sounding at the end of future cycles,
TO CANCEL THE 6-SECOND BEEP
1. Press and held the BAKE and
BROIL pads, at the same time
for 3 seconds, until the display
shows "SF"
2. Press the KITCHEN TIMER ON/
OFF pad. The display will show
"CON BEEP" (continuous beep).
3. Press the KITCHEN TIMER ON/
OFF pad again. The display will
show "BEEP" (beep canceled).
4. Press the START pad to cancel
the 6-second beep and leave the
special feature mode.
Ifyou would like to return the
6-second heap, repeat steps above
until the display shows your choice
and press the START pad
A'rrENTION TONE - This tone will
sound if you make an error or an
oversight is made while setting an
oven function,
Examples would be:
a. Setting a clean cycle and the
oven door is not properly closed
b. Setting function and not pressing
the START pad.
c. Pressing an additional function pad
without first setting a temperature
or time
d. "ERR" will flash if you set an
invalid temperature. Press the
CLEAR/OFF pad to clear the
control and reset your oven
function
Any of these can be quickly identified
by watching the display.
PREHEAT TONE - When you
select a cooking mode, set an oven
temperature and press the START
pad, the oven starts to heat. When the
temperature inside the oven reaches
the temperature you have set, atone
will sound to let you know the oven is
ready for baking.
ffyou set an oven function and the
control beeps while the display is
flashing "F" and a number or letter
such as "F-4" or "Fr' there may be
a problem with the control or oven.
Simply press the CLEAR/OFF pad
and wait about an hour Try setting
the function again Ifthe code
repeats, write down the flashing
code and call for service Tell the
technician what code was flashing,
÷
I 20P322 ENv03 9 . 8/20/02, 2:58 PM
Loading ...
Loading ...
Loading ...