Loading ...
Loading ...
Loading ...
17
En
Using the DVS system
Controlling the Serato DJ software
Here we explain three types of connections for different usage environments.
! When using analog players, proceed to page 17 .
! When using DJ players, proceed to page 18 .
! When using analog players and DJ players simultaneously, proceed to page 19 .
When using analog players
The following describes how to use the unit by connecting analog players to the Serato DJ software’s decks from [DECK1] to [DECK2].
Computer
Audio cable Audio cable
Ground wire Ground wire
Rear panel
Analog player Analog player
To powered speakers
To the AC adaptor
CONTROL VINYL CONTROL VINYL
1 Connect the analog player used to control [DECK1]
to the [PHONO] terminals of [CH1], and the analog
player used to control [DECK2] to the [PHONO]
terminals of [CH2].
2 Connect the ground wires for the respective
analog players to this unit’s [SIGNAL GND] terminals.
3 Set the control vinyls on the analog players.
4 Switch the DJM-S3’s input.
Set the input selector switches of [CH1] and [CH2] to the [ ] side.
Input selector switches
5 Select [SETUP] on the Serato DJ software’s screen,
then select [TURNTABLES] at the [Audio] tab in the
utility settings.
Loading ...
Loading ...
Loading ...