Loading ...
Loading ...
Loading ...
13
En
Operation
Advanced Operations
Using the SOUND COLOR FX function
This is an effect that changes in association with the [COLOR] control.
Sound passed through a filter is output.
1 Press the [FILTER] button.
The [FILTER] button flashes, and the effect is set for [CH1] and [CH2].
2 Turn the [COLOR] control.
The effect is applied to the channel(s) for which the control(s) was (were)
turned.
! Turn counterclockwise: The cutoff frequency of the low-pass filter is
decreased slowly.
! Turn clockwise: The cutoff frequency of the high-pass filter is
increased slowly.
3 Turn the [PARAMETER] control.
The effect’s quantitative parameter can be adjusted.
Turn to the right to increase resonance.
Canceling the SOUND COLOR FX effect
Press the [FILTER] button that is flashing.
The effect is canceled.
Operating software by MIDI interface
This unit outputs the operation information of buttons and controls in
universal MIDI format.
When connected by USB cable to a computer on which a MIDI-
compatible software is installed, the software can be operated from this
unit.
Install the software on your computer before use. Also, set the software’s
audio and MIDI related settings.
! For MIDI channel setting instructions, see Changing the settings on
page 21 .
! For details of the MIDI messages on this unit, see the website below.
pioneerdj.com/support/
1 Connect a computer to the [USB] terminal on this
unit.
After the connection, transmission of the MIDI messages starts.
! When operating the fader or control, a message corresponding to
the position is sent.
Loading ...
Loading ...
Loading ...