Loading ...
Loading ...
Loading ...
28
EN
Add Item
Laundry can be added or removed after the
washing programme is started.
1
Press the Add Item button when the LED is
turned on.
2
Open the door after door lock is released.
3
Add or remove laundry.
4
Press the Start/Pause button again to
continue the cycle. The cycle continues
automatically.
NOTE
• For safety reasons, the door remains locked
when the water level or temperature is high. It
is not possible to add laundry during this time.
• If the water temperature in drum is high, wait
until it cools down.
CAUTION
• When adding laundry, make sure to completely
push it into the drum. If laundry gets stuck in
the door latch hole, the rubber packing may
be damaged, causing water leakage and
malfunction.
• Forcing the door open may cause part
damage, destruction, or safety problems.
• If you open the door while there are a lot of
suds and water in drum, the suds or water may
flow, causing burn injury or wet floor.
Pre Wash ( )
If the laundry is heavily soiled, the Pre Wash
programme is recommended.
1
Press the Power button.
2
Select a washing programme.
3
Press and hold the Pre Wash button for 3
seconds.
4
Press the Start/Pause button.
Soil
1
Press the Power button.
2
Select a washing programme.
3
Press the Soil button.
4
Press the Start/Pause button.
Temp.
The Temp. button selects the wash and rinse
temperature combination for the selected
programme. Press this button until the desired
setting is lit. All rinses use cold tap water.
• Select the water temperature suitable for
the type of load you are washing. Follow the
garment fabric care labels for best results.
Loading ...
Loading ...
Loading ...