EC860M Instructions for use

Loading ...

Cleaning the drip tray

Attention!

The drip tray is equipped with a oating water level indicator

(red) (A11). As soon as this indicator starts protruding from

the cup tray, empty the tray and clean it, otherwise the water

may overow and damage the machine, and the surrounding

work-top.

1. Removethedriptray(g.26).

2. R

emove the cup tray, dispose of the water (g. 27) and

clean the tray using a cloth: then re-assemble the drip tray.

3. Re-insertthedriptray.

Cleaning the coee lters

Regularlycleanthecoeeltersrinsingthemunderrunning

water.Checkthattheholesarenotblocked.Iftheyare,clean

themusingapin(g.28).

Cleaning the boiler outlet

Rinsetheboileroutletevery200coeesdelivered,bydelivering

0.5l of water from the boiler outlet (place a cup under the

boiler outlet and then press either the 1 or 2 cup coee button

to deliver a coee without using coee powder).

Cleaning the milk container

Clean the milk container after each milk preparation, as

described below:

1. Extract the lid.

2. Removethemilkspouttubeandtheintaketube(g.29).

3. Removethefrothregulatorbybypullingitout(g.30).

4. Carefully clean all components using hot water and a mild

detergent. All components can be washed in the

dishwasher by positioning them on the upper rack

of the dishwasher. Pay particular attention that milk

residues do not remain inside the holes and in the groove

on the narrow part of the froth regulator.

5. Also check that the intake tube and the milk spout tube

are not obstructed by milk residues.

6. Re-assemblethefrothregulator,themilkspouttubeand

the milk intake tube.

7. Place the lid on the milk container.

Replacing the lter

After two months of duration (see calendar), or if the appliance is

notusedfor3weeks,replacethelterasdescribedinparagraph

“Activationofthesoftenerlterandllingofthetank”(page9).

Descaling

Descale the machine when the light  ashes on the

control panel. Proceed as follows:

1. Removethewaterlter.Fillthetankwiththedescaling

solution obtained by diluting the descaler with water as

indicated on the descaler pack.

2. Insertthehotwaterspout(g.8).

3. Place one container under the boiler outlet and one under

thehotwaterspout(g.31)andensurethedriptrayis

empty and correctly inserted.

4. Simultaneously press the and

buttons

: light

turns on (if the hot water spout has not been

inserted, the light ashes).

5. Press the  button. Descaling is signaled by the

LED that alternate in sequence.The descaling program

automatically performs a series of deliveries from the

boiler outlet and from the hot water spout at intervals, to

remove the lime scale from inside the coee machine.

6. Once the descaling solution is terminated, the light

turns on to indicate rinsing is necessary.

7. To eliminate the solution and lime scale residues, rinse the

tankandllitwithfreshwater(withoutdescaler);empty

the containers and place them under the boiler outlet and

hot water spout.

8. Press the button:rinsingstartsandallLEDsashin

sequence.

9. Rinsingstopswhenthetankisempty:rinseandrellthe

tank.

10. Light turns on: press the relative button: delivery

starts and interrupts automatically.

The appliance is now ready for use.

Repairstothecoeemachinerelativetolimescaleproblems

are not covered by the warranty if the descaling procedure

described above is not performed on a regular basis.

Instructions for use

Loading ...

Instructions for use - Page 14