Loading ...
Loading ...
Loading ...
Troubleshooting
21
BDS 280/580
Problems Solutions
The disc does not play • Check that the disc is inserted correctly (label side up).
• Check that the disc is the correct type: BD Video (single-layer or
double-layer),
• DVD-Video, DVD+R/+RW, DVD-R/-RW, CDDA (CD digital audio),
CD-R/RW. Other disc types will not play.
• Check that the disc surface is clean and not scratched.
There is noise or other interference in the picture while playing a Blu-ray Disc
recording
or DVD
• Check that the disc surface is clean and not scratched.
The sound and picture are out of sync when playing to an Aux source • Press the Options button and perform the Lip Sync adjustment to bring
the sound and picture into synchronization.
Cannot tune in radio stations • Check that the FM antenna is correctly connected.
• Adjust the antenna’s position. If necessary, use a powered FM antenna
or an outdoor FM antenna.
The system does not respond to remote-control commands • Replace all three remote-control batteries with fresh ones, and make
sure that they are installed with the correct polarity.
• Hold the remote closer to the system.
• Check that the system’s remote sensor is in the line of sight of the
remote control.
The remote does not control programmed components (TV or video) • Check that you have pressed the remote’s Aux button before trying to
operate the component.
• Re-program and/or re-teach the component’s commands into the
remote.
The O symbol appears on the screen when you press a remote-control button • The selected function is not permitted at the time the button is pressed.
The system does not respond to commands, or it behaves in an erratic way • Unplug the system’s power cord from the AC outlet, wait 30 seconds,
then plug it back in.
Loading ...
Loading ...
Loading ...