Loading ...
Loading ...
Loading ...
3. Insert the connector into the power
socket inside the vehicle.
4. Correct the tire inflation pressure to at
least 2.0 bar.
– Increase tire inflation pressure: with
the ignition switched on or the en-
gine running, switch on the com-
pressor.
– Reduce tire inflation pressure: press
the button on the compressor.
5. Unscrew the connection hose of the
compressor from the tire valve.
6. Pull the connector out of the power
socket inside the vehicle.
7. Stow the Mobility System in the vehicle.
Continuing the trip
Do not exceed the maximum permissible
speed of 50 mph/80 km/h.
Reinitialize the Flat Tire Monitor, refer to
page 172.
Reset the Tire Pressure Monitor, refer to
page 167.
Replace the nonworking tire and the sealant
container of the Mobility System promptly.
Snow chains
Safety information
WARNING
With the mounting of snow chains on un-
suitable tires, the snow chains can come
into contact with vehicle parts. There is a
risk of accidents or risk of damage to prop-
erty. Only mount snow chains on tires that
are designated by their manufacturer as
suitable for the use of snow chains.
WARNING
Insufficiently tight snow chains may dam-
age tires and vehicle components. There is
a risk of accidents or risk of damage to
property. Make sure that the snow chains
are always sufficiently tight. Re-tighten as
needed according to the snow chain manu-
facturer's instructions.
Fine-link snow chains
The manufacturer of your vehicle recom-
mends use of fine-link snow chains. Certain
types of fine-link snow chains have been
tested by the manufacturer of the vehicle
and recommended as road-safe and suitable.
Information regarding suitable snow chains
is available from a dealer’s service center or
another qualified service center or repair
shop.
Use
Use only in pairs on the front wheels, equip-
ped with the tires of the following size:
– 205/65 R 16.
– 205/60 R 17.
John Cooper Works:
205/60 R 17
Seite 269
Wheels and tires MOBILITY
269
Online Edition for Part no. 01402723835 - VI/18
Loading ...
Loading ...
Loading ...