Loading ...
Loading ...
Loading ...
On the front passenger seat
Deactivating airbags
WARNING
Active front-seat passenger airbags can in-
jure a child in a child restraint system
when the airbags are activated. There is a
risk of injury. Make sure that the front-
seat passenger airbags are deactivated and
that the PASSENGER AIRBAG OFF indica-
tor light lights up.
After installing a child restraint system in
the front passenger seat, make sure that the
front, knee and side airbags on the front
passenger side are deactivated.
Deactivate the front-seat passenger airbags
automatically, refer to page 165.
Seat position and height
Before installing a child restraint system,
move the front passenger seat as far back as
possible and adjust its height to the highest
and thus best possible position for the belt
and to offer optimal protection in the event
of an accident.
If the upper anchorage of the safety belt is
located in front of the belt guide of the child
seat, move the front passenger seat care-
fully forward until the best possible belt
guide position is reached.
Child seat security
The rear safety belts and the front passen-
ger safety belt can be permanently locked to
fasten child restraint systems.
Locking the safety belt
1. Pull out the belt strap completely.
2. Secure the child restraint system with
the safety belt.
3. Allow the belt strap to be pulled in and
pull it tight against the child restraint
system. The safety belt is locked.
Unlocking the safety belt
1. Unbuckle the safety belt buckle.
2. Remove the child restraint system.
3. Allow the belt strap to be pulled in com-
pletely.
In some cases it may be necessary to sepa-
rate the lower belt attachment. Safety belts,
refer to page 98.
LATCH child restraint fixing system
General information
LATCH: Lower Anchors and Tether for Chil-
dren.
Pay attention to the operating and safety in-
formation of the child restraint system man-
ufacturer when installing and using LATCH
child restraint fixing systems.
Mounts for the lower LATCH
anchors
The lower anchors may be used to attach
the CRS to the vehicle seat up to a com-
bined child and CRS weight of 65 lb/30 kg
when the child is restrained by the internal
harnesses.
Seite 109
Transporting children safely CONTROLS
109
Online Edition for Part no. 01402723835 - VI/18
Loading ...
Loading ...
Loading ...