Loading ...
Loading ...
Loading ...
Under the following conditions, the parking
brake is automatically released:
– Engine on.
– Gear engaged.
– Driver buckled in and doors closed.
– Engine power is sufficient to drive off.
Malfunction
In the event of a failure or malfunction of
the parking brake, secure the vehicle
against rolling using a wheel chock, for in-
stance when leaving it.
After a power failure
Putting the parking brake into
operation
1. Switch on the ignition.
2. Press the switch while stepping on
the brake pedal or selector lever posi-
tion P is set.
It may take several seconds for the brake to
be put into operation. Any sounds associ-
ated with this are normal.
The indicator light in the instrument
cluster goes out as soon as the park-
ing brake is ready for operation.
Turn signal, high beams, head-
light flasher
Turn signal
Using turn signals
Press the lever past the resistance point.
Canada: the lever returns into its starting
position after actuation. To switch off man-
ually, slightly tap the lever to the resistance
point.
Triple turn signal activation
Lightly tap the lever up or down.
The triple turn signal duration can be ad-
justed.
Via the Central Information Display (CID):
1. "My MINI"
2. "Vehicle settings"
3. "Lighting"
4. "Exterior lighting"
5. "One-touch turn signal"
6. Select the desired setting.
Settings are stored for the profile currently
used.
Signaling briefly
Press the lever to the resistance point and
hold it there for as long as you want the
turn signal to flash.
Seite 119
Driving CONTROLS
119
Online Edition for Part no. 01402723835 - VI/18
Loading ...
Loading ...
Loading ...