Loading ...
Loading ...
Loading ...
||
10 Maintenance and service
10
386
•
Primer
17
- a special adhesive primer in a
spray can is available for e.g. plastic-
coated bumpers.
•
base coat and clear coat - are available in
spray cans or as touch-up pens/sticks
18
.
•
Masking tape.
•
fine sand paper
17
.
Colour code
The label for colour code is located on the
car's door pillar and is visible when the right-
hand rear door is opened.
Exterior colour code
Any secondary exterior colour code
It is important that the correct colour is used.
For product label location, see Type designa-
tions (p. 388).
Repair minor paintwork damage such
as stone chips and scratches
G021832
Before work is begun, the car must be clean
and dry and at a temperature above 15 °C.
1. Apply a piece of masking tape over the
damaged surface. Then remove the tape
to remove any loose paint.
If the damage is down to the metal, use
of a primer is appropriate. In the event of
damage to a plastic surface, an adhesive
primer should be used to give better
results - spray into the lid of the spray
can and brush on thinly.
2. Before painting, gentle polishing using a
very fine polishing agent may be carried
out locally if required (e.g. if there are any
uneven edges). The surface is cleaned
thoroughly and left to dry.
3. Stir the primer well and apply using a fine
brush, a matchstick or similar. Finish off
with a basecoat and clearcoat once the
primer has dried.
4. For scratches, proceed as above, but
mask around the damaged area to pro-
tect the undamaged paintwork.
NOTE
If the stone chip has not penetrated down
to the meal and an undamaged layer of
paint remains in place, fill in with basecoat
and clearcoat as soon as the surface has
been cleaned.
Related information
•
Rustproofing (p. 384)
17
If required.
18
Follow the instructions that are included with the package for the touch-up pen/stick.
Loading ...
Loading ...
Loading ...