Loading ...
Loading ...
Loading ...
||
10 Maintenance and service
10
358
* Option/accessory, for more information, see Introduction.
NOTE
Outside lighting such as headlamps, fog
lamps and rear lamps may temporarily
have condensation on the inside of the
lens. This is normal, all exterior lighting is
designed to withstand this. Condensation
is normally vented out of the lamp housing
when the lamp has been switched on for a
time.
Related information
•
Lamps - specifications (p. 363)
•
Lamp replacement - location of front
lamps (p. 358)
•
Lamp replacement - location of rear
lamps (p. 361)
•
Lamp replacement - vanity mirror lighting
(p. 363)
Lamp replacement - location of front
lamps
The overview shows the location of the lamps
at the front.
Position/parking lamps (p. 361) (LED in
Xenon headlamps)
Main beam in Xenon headlamps
(p. 360) / Extra main beam in Xenon
headlamps (p. 360)
Dipped beam in halogen headlamps
(p. 359) / Xenon lamps in Xenon head-
lamps (p. 357)
Indicator (p. 360)
Daytime running lights (p. 361) (LED* or
bulb depending on variant)
Related information
•
Lamp replacement - general (p. 357)
•
Lamps - specifications (p. 363)
Lamp replacement - headlamps
All of the headlamp bulbs are replaced via the
engine compartment. First loosen and remove
the whole headlamp.
1.
Lift out the bonnet stop.
2.
Loosen the screw with a Torx tool,
size T30.
3.
Turn the locking pin anticlockwise.
Pull out the locking pin.
4.
Release the headlamp by alternately
tilting and pulling it out.
IMPORTANT
Take care when lifting out the headlamp so
as not to damage any parts.
Loading ...
Loading ...
Loading ...