Loading ...
Loading ...
Loading ...
||
03 Instruments and controls
03
108
Message Specification
Time for reg-
ular mainte-
nance
Time for regular service -
contact a workshop
B
. The
timing is determined by
the number of kilometres
driven, number of months
since the last service,
engine running time and
oil grade.
Maintenance
overdue
If the service intervals are
not followed then the
warranty does not cover
any damaged parts -
contact a workshop
B
.
Transmission
Oil change
needed
Contact a workshop
B
to
check the car as soon as
possible.
Transmission
Reduced
performance
Transmission cannot han-
dle full capacity. Drive
with care until the mes-
sage clears
C
.
If shown repeatedly -
contact a workshop
B
.
Transmission
hot Reduce
speed
Drive more smoothly or
stop the car in a safe
manner. Disengage the
gear and run the engine
at idling speed until the
message clears
C
.
Message Specification
Transmission
hot Stop
safely Wait
for cooling
Critical fault. Stop the car
immediately in a safe
manner and contact a
workshop
B
.
Temporarily
off
A
A function has been tem-
porarily switched off and
is reset automatically
while driving or after star-
ting again.
Low battery
charge
Power save
mode
The audio system is
switched off to save
energy. Charge the bat-
tery.
A
Part of message, shown together with information on
where the problem has arisen.
B
An authorised Volvo workshop is recommended.
C
For more messages concerning automatic gearbox.
Related information
•
Messages - handling (p. 108)
•
Menu navigation - combined instrument
panel (p. 106)
Messages - handling
Use the left-hand stalk switch to acknowledge
and browse among messages (p. 107) that
are shown in the information display of the
combined instrument panel.
When a warning, information or indicator
symbol illuminates, a corresponding message
is shown in the display. An error message is
stored in a memory list until the fault has
been rectified.
Press OK on the left-hand stalk switch to
acknowledge
28
a message. Scroll through
messages with the thumbwheel (p. 106).
NOTE
If a warning message appears while you
are using the trip computer, the message
must be read (press OK) before the previ-
ous activity can be resumed.
Related information
•
Menu overview - analogue combined
instrument panel (p. 107)
•
Menu overview - digital combined instru-
ment panel (p. 107)
Loading ...
Loading ...
Loading ...