Loading ...
Loading ...
Loading ...
03 Instruments and controls
03
106
Magnetic zones.
4. Press the button repeatedly until the
required magnetic zone (
1–15) is shown.
See the map of magnetic zones for the
compass.
5. Wait until the display returns to showing
the character
C, or hold the button on the
bottom of the rearview mirror depressed
for approx. 6 seconds (use e.g. a paper
clip) until the character C is shown.
6. Drive slowly in a circle at a speed of no
more than 10 km/h until a compass direc-
tion is shown in the display, indicating
that calibration is complete. Then drive a
further 2 circles to fine-tune calibration.
7. Repeat the above procedure as neces-
sary.
Menu navigation - combined
instrument panel
The menus shown on the information display
in the combined instrument panel (p. 62) are
controlled with the left-hand stalk switch.
Which menus are shown depends on the key
position (p. 77).
Information display (analogue combined instru-
ment panel) and menu navigation controls.
Information displays (digital combined instrument
panel) and controls for menu navigation.
OK - access the menu, acknowledge
messages and confirm menu selections.
Thumbwheel – browse between menu
options.
RESET - reset data in the selected trip
computer step and go back in the menu
structure.
If there is a message (p. 107) then it must be
acknowledged with OK in order that the
menus shall be shown.
Related information
•
Messages - handling (p. 108)
•
Menu overview - analogue combined
instrument panel (p. 107)
•
Menu overview - digital combined instru-
ment panel (p. 107)
Loading ...
Loading ...
Loading ...