Loading ...
Loading ...
Loading ...
83
# Zooming
# Zooming
When a compatible EF Cinema lens (A 191) is attached to the camcorder, you can use the joystick on the grip
unit to operate the zoom.
Required settings on EF Cinema lenses
To operate the zoom from the camcorder, you will need to enable automatic adjustment using the controls on
the lens. Required settings vary depending on the lens. Refer to the following table and the instruction manual of
the lens used.
Using the Joystick
1 Enable automatic zoom adjustment on the lens.
2 Open the zoom’s [Setting] submenu.
[~ Camera Setup] > [Camera Grip Zoom] > [Setting]
3 Select [On] and then press SET.
4 Open the zoom’s [Speed] submenu.
[~ Camera Setup] > [Camera Grip Zoom] > [Speed]
5 Select the desired zoom speed and then press SET.
• Zoom speeds are constant; [1] being the slowest and [16] the
fastest.
6 Close the menu and use the joystick on the grip unit to
zoom.
• Push the joystick up to zoom in (telephoto) and push it down to
zoom out (wide-angle).
NOTES
• When an optional RC-V100 Remote Controller is connected to
the camcorder and the lens is correctly set, you can zoom with
the remote controller’s ZOOM dial.
• When using slow zoom speeds, it may take longer for the lens to
start moving.
Lens Part used on the lens Setting for automatic adjustment
CN7x17 KAS S/E1
CN20x50 IAS H/E1
Zoom operation change-over knob SERVO
CN-E18-80mm T4.4 L IS KAS S
CN-E70-200mm T4.4 L IS KAS S
Zoom change-over switch SERVO
Operating modes:
[~ Camera Setup]
[Camera Grip Zoom]
[Setting] ….. [Off]
[Speed] ….. [8]
Loading ...
Loading ...
Loading ...