Loading ...
Loading ...
Loading ...
18
Special features of your oven control.
12-Hour, 24-Hour or Clock Black-Out
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour
military time clock or black out the clock
display, follow the steps below.
Press the Bake and Broil Hi/Lo pads
(on double oven models, use the upper
oven controls)
at the same time for
3 seconds, until the display shows SF.
Press the Clock pad once. The
display will show 12 hr. If this is
the choice you want, press the
Start pad.
Press the Clock pad again to change
to the 24-hour military time clock.
The display will show 24 hr. If this
is the choice you want, press the
Start pad.
Press the Clock pad again to black
out the clock display. The display
will show OFF. If this is the choice
you want, press the Start pad.
NOTE: If the clock is in the black-out mode, you
will not be able to use the Delay Start function.
Tone Volume (on some models)
This feature allows you to adjust the tone
volumes to a more acceptable volume. There are
three possible volume levels.
Press the Bake and Broil Hi/Lo pads
(on double oven models, use the
upper oven controls) at the same
time for 3 seconds, until the display
shows SF.
Press the Oven Light On/Off pad. The
display will show 2 BEEP. This is the
middle volume level.
Press the Oven Light On/Off pad again.
The display will show 3 BEEP. This is
the loudest volume level.
Press the Oven Light On/Off pad again.
The display will show 1 BEEP. This is
the quietest volume level.
For each time the level is changed,
a tone will sound to provide an
indication of the volume level.
Choose the desired sound level
(1 BEEP, 2 BEEP, 3 BEEP).
Press the Start pad to activate the
desired level shown.
NOTE:
■ On double oven models, this activates this
special feature for both ovens.
■ On models with oven knob(s), this feature is not
available for the lower oven.
Cook and Hold
Your new control has a cook and hold feature that
keeps cooked foods warm for up to 3 hours after
Timed Baking or Roasting is finished.
NOTE: This feature can only be programmed to
work with Timed Baking or Roasting. (See the
Using the timed baking and roasting features
section.) After Timed Baking or Roasting has
automatically stopped, the programmed Cook
and Hold will automatically start.
To activate this feature for use after
Timed Baking or Roasting, follow the
steps below.
Press the Bake and Broil Hi/Lo pads
(on double oven models, use the
upper oven controls) at the same
time for 3 seconds until the display
shows SF. Then proceed with steps
2 through 3, using the pads for the
upper or lower oven.
Press the Cooking Time pad. The
display will show Hld OFF.
Press the Cooking Time pad again to
activate the feature. The display will
show Hld ON.
Press the Start pad to activate the
cook and hold feature and leave the
control set in this special features
mode.
NOTE: On models with oven knob(s), this feature
is not available for the lower oven.
Safety InstructionsOperating InstructionsCare and CleaningTroubleshooting TipsConsumer Support
+
+
+
Loading ...
Loading ...
Loading ...