Loading ...
Loading ...
Loading ...
Safety Instructions
Operating Instructions
Care and Cleaning
Troubleshooting Tips Consumer Support
Special features of your oven control. GEAppliances.com
Your new press pad control has additional features that you may choose to use. The following are the features
and how you may activate them.
The special feature modes can only be activated while the display is showing the time of day. They remain
in the control’s memory until the steps are repeated.
When the display shows your choice, press the
Start pad. The special features will remain in memory after
a power failure, except for the Sabbath feature, which will have to be reset.
12-Hour Shut-Off
With this feature, should you forget and leave the
oven on, the control will automatically turn off the
oven after 12 hours during baking functions or
after 3 hours during a broil function.
If you wish to turn OFF this feature, follow
the steps below.
Press the Bake and Broil Hi/Lo pads
(on double oven models, use the upper
oven controls)
at the same time for
3 seconds until the display shows SF.
Press the Delay Start pad until
no shdn (no shut-off) appears in the
display.
Press the Start pad to lock in the
no shdn (no shut-off) feature and
leave the control set in this special
features mode.
NOTE:
On models with press pad controls for both
ovens, this activates this special feature for
both ovens.
On models with oven knob(s), this feature is not
available for the lower oven.
Fahrenheit or Celsius Temperature Selection
Your oven control is set to use the Fahrenheit
temperature selections but you may change this
to use the Celsius selections.
Press the Bake and Broil Hi/Lo pads
(on double oven models, use the upper
oven controls)
at the same time for
3 seconds until the display shows SF.
Press the Broil Hi/Lo and Cooking
Time pads at the same time. The
display will show F (Fahrenheit).
Press the Broil Hi/Lo and Cooking
Time pads again at the same time.
The display will show C (Celsius).
Press the Start pad.
NOTE:
On models with press pad controls for both
ovens, the new setting will be displayed for
both ovens.
On models with oven knob(s), this feature is not
available for the lower oven.
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds until
the Clear/Off pad is pressed. This continuous
6-second beep may be canceled.
To cancel the 6-second beep:
Press the Bake and Broil Hi/Lo pads
(on double oven models, use the upper
oven controls)
at the same time for
3 seconds until the display shows SF.
Press the Kitchen Timer On/Off
pad. The display shows CON BEEP
(continuous beep). Press the Kitchen
Timer On/Off pad again. The display
shows BEEP. (This cancels the one
beep every 6 seconds.)
Press the Start pad.
NOTE:
On models with press pad controls for both
ovens, this cancels the end of cycle tone for
both ovens.
On models with oven knob(s), this feature is not
available for the lower oven.
17
+
+
+
+
Loading ...
Loading ...
Loading ...