DEGH70W User Manual

Loading ...

GAS SUPPLY:

■ The connection must be executed by an authorised person according to the relevant

standards.

■ Before connecting the appliance to the gas main, mount the brass conical adaptor

onto the gas inlet pipe, upon which the gasket has been placed (figures 6a-6b).

Conical adaptor and gasket are supplied with the appliance (packed with conversion

kit for use with Natural gas or Universal LPG).

■ This appliance is suitable for use with Natural Gas or Universal LPG. (Check the “gas

type” sticker attached to the appliance).

■ For Natural Gas models the gas supply is connected to the pressure regulator which is

supplied with the appliance (fig. 6a). Model DEGH70W: adjust the regulator to obtain

a test point pressure of 1 kPa with the two semi-rapid (SR) burners operating at the maxi-

mum. Model DEGH70WF: adjust the regulator to obtain a test point pressure of 1 kPa

with the Triple-ring (TR) burner operating at the maximum.

■ For Universal LPG models the gas supply is connected to the test point adaptor

which is supplied with the appliance (fig. 6b) and ensure that the supply pressure is

regulated to 2.75 kPa.

■ Do NOT force the ”elbow“ rotation prior to loosening nut.

■ Do NOT over tighten the nut at the ”elbow“.

Figure 6b

Figure 6a

Gas connection for

UNIVERSAL LPG

Test point adaptor

Gasket

Brass conical adaptor

(Thread tight: use

suitable seal)

Gas inlet pipe

Test

point