Loading ...
Loading ...
Loading ...
User instructions
16
ADDING RINSE AID
Rinse aid helps the dishes dry faster and prevents
the formation of scale deposits and staining; it is
automatically added to the water during the final
rinse cycle.
To add rinse aid:
Open the door.
Rotate the container cap anticlockwise by ¼ of a turn and remove it.
Add the rinse aid until the container is full (approximately 140 ml). The
optical level indicator on the side of the cap should be completely
dark. Refill the rinse aid when the optical level indicator turns clear
again, or when the rinse aid warning light turns on.
Replace the cover and turn it clockwise.
Use a cloth to remove any spillage of rinse aid which might lead to
the formation of excess foam.
ADJUSTING THE RINSE AID DISPENSER SETTING
The dishwasher is factory set for medium water hardness. It is possible to
change this setting by turning the dispenser selector to the required
position: the amount of rinse aid dispensed depends on the selector
position.
To adjust the rinse aid setting, rotate the dispenser cap a quarter of a
turn anticlockwise and remove it.
Then rotate the rinse aid selector to the desired position.
Replace the cap, turning it clockwise.
The amount of rinse aid must be increased if the washed dishes
appear dull or have circular stains.
If, on the other hand, the dishes are sticky or have white streaks, it is
necessary to reduce the rinse aid dosage.
Loading ...
Loading ...
Loading ...