Loading ...
Loading ...
Loading ...
User instructions
10
These products
are not suitable
for use with
excessively “hard”
water.
If the hardness level set is higher than H3, when the option is activated
the relative light flashes to indicate that the product is being used
incorrectly; the dishwasher will still work, but washing results may be
poor.
ULTRA CLEAN
Prolongs the final hot rinse to ensure a further reduction in the bacteria
level. If the temperature in the tank falls during this stage of the program
(e.g. because the door is opened or due to a power cut), the option light
an program lights (2) flash to warn that this additional wash phase has not
been completed successfully. This does not mean that the wash program
has been less effective than usual.
PROGRAM DELAY
The start of the washing program can be delayed by from 1 to 24 hours
depending on the model, to program the dishwasher to operate at the
preferred time of day (e.g. overnight).
● It is not possible to select the option once the cycle has begun.
● When the door is closed, the appliance will prewash the dishes, after
which the count of the "program delay" set will begin.
Models without display
The start of the program can be delayed by 3,
6 or 9 hours. The button can be pressed again
to select the delay required (the relative light
comes on) or disable the option (lights off).
Models
with display
The button can be pressed again to select the
delay required, increasing it in one-hour
steps, with the duration shown on the display.
Loading ...
Loading ...
Loading ...