Loading ...
Loading ...
Loading ...
User instructions
8
1.2 Wash programs
Before starting a wash program check that:
The water supply tap is open.
The softener container contains regenerating salt.
The correct amount of detergent has been added to
the dispenser.
The baskets have been correctly loaded.
The spray arms are able to rotate freely and without
obstruction.
The dishwasher door is securely closed.
Warning:
during the initial phase of the washing program, the operation of sprayers
is not perceived because they start rotating about 5 minutes after the start.
This is the normal operation of the washing cycle.
OPTION SELECTION
Press the button to the required option; the corresponding light will come
on to confirm activation.
It is not possible to select any options when the soak program
is being used.
All options except "Flexi Tabs" are disabled at the end of the
wash cycle. To disable the “Flexi Tabs” option, press the
button (the light will turn off).
All options, including "Flexi Tabs" are disabled when a program
is CANCELLED after it has begun.
ADDITIONAL OPTIONS (on some models only)
These are activated by pressing two buttons simultaneously as shown
by the graphics on the control panel (e.g. “Flexi Tabs” in this illustration)
Loading ...
Loading ...
Loading ...