Loading ...
Loading ...
ACC position
No ACC position
• Use this unit with a 12-volt battery and negative grounding only. Failure to do so
may result in a fire or malfunction.
• To prevent a short-circuit, overheating or malfunction, be sure to follow the
directions below.
−Disconnect the negative terminal of the battery before installation.
−Secure the wiring with cable clamps or adhesive tape. Wrap adhesive tape
around wiring that comes into contact with metal parts to protect the wiring.
−Place all cables away from moving parts, such as the shift lever and seat rails.
−Place all cables away from hot places, such as near the heater outlet.
−Do not connect the yellow cable to the battery by passing it through the hole
to the engine compartment.
−Cover any disconnected cable connectors with insulating tape.
−Use a fuse of the rating prescribed.
−Never wire the negative speaker cable directly to ground.
−Never band together negative cables of multiple speakers.
• The graphical symbol placed on the product means direct current.
• Check the connections of the power supply and speakers if this unit fuse blows.
Determine and resolve the cause, then replace the fuse with and identical
equivalent.
• Always install this unit on a flat surface.
Do not install this unit on a surface that is not flat or on a surface with a
protrusion. Doing so could result in malfunction.
• When installing this unit, do not allow parts such as extra screws to get caught
between this unit and the automobile.
Doing so could cause malfunction.
• Do not allow this unit to come into contact with liquids. Electrical shock could
result.
Also, damage to this unit, smoke, and overheating could result from contact with
liquids.
The surfaces of the amplifier and any attached speakers may also heat up and
cause minor burns.
• Do not attempt to disassemble or modify this unit. Doing so may result in fire,
electric shock or other malfunction.
This unit
This unit provides a variety of sound effects by intuitive operation using a
smartphone.
FUSE 10A
Power cord input
Parking brake cord input
Subwoofer output
Rear output/Middle range output
Front output/High range output
RCA input
Remote control sensor input
USB port
Reset button
Power indicator
INPUT select switch
DSP MODE select switch
Remote control sensor
Loading ...
Loading ...
Loading ...