Loading ...
Loading ...
Loading ...
246
What to do in an emergency
7. Insert the sealant bottle into the
housing (5) of the compressor so
that the bottle is upright.
8. Ensure that the compressor is
switched off.
9. Connect between compressor and
the vehicle power outlet using the
cable and connectors (4).
✽✽
NOTICE
Only use the front passenger side
power outlet.
10. With the engine start/stop button
position on: switch on the com-
pressor and let it run for approxi-
mately 5~7 minutes to fill the
sealant up to proper pressure
(refer to the "Tyres and wheels" in
chapter 8.). The inflation pressure
of the tyre after filling is unimpor-
tant and will be checked/corrected
later. Be careful not to overinflate
the tyre and stay away from the
tyre when filling it. When the tyre
and wheel are damaged, do not
use Tyre Mobility Kit for your safety.
OJF067057 OJFHP066038R
CAUTION - Tyre pressure
Do not attempt to drive your
vehicle if the tyre pressure is
below 200 kPa (29 psi). This
could result in an accident due
to sudden tyre failure.
Loading ...
Loading ...
Loading ...