Loading ...
Loading ...
Loading ...
5101
Driving your vehicle
Detecting sensor
The sensors are located inside the
rear bumper.
Always keep the rear bumper clean
for the system to work properly.
Warning message
The message will appear to notify
the driver with one of followings. The
light on the switch and the system
will turn off automatically.
- There are foreign substances on
the surface or inside the rear
bumper or it is hot near the rear
bumper.
- When a trailer or carrier is installed.
- When driving wide area like desert
around few vehicles.
- When driving in the bad weather
such as heavy rain or snow
When you install a trailer or carrier,
turn off BSD system. When you use
the BSD system, remove a trailer or
carrier.
Remove the foreign substance on
the rear bumper.
After the foreign substance is
removed, if you drive for approxi-
mately 10 minutes, the system will
work normally.
If the system does not work normally
even though the foreign substance,
trailer or carrier, or other equipment
is removed, take your vehicle to a
professional workshop and have the
system checked. Kia recommends to
visit an authorised Kia dealer/service
partner.
OJFH055150 OJF055091L
Loading ...
Loading ...
Loading ...