Loading ...
Loading ...
Loading ...
E-38
How to Replace the Filter Assembly / Deodorizing Filter
Remove the rear panel and pre-filter (P.E-14)
Remove the old filter (P.E-14)
Remove the plastic packaging of the new filter, and attach the filter in the unit
Attach the pre-filter and rear panel to the unit (P.E-15)
Attach the deodorizing filter in the unit.
Attach the filter assembly to the unit.
Remove the filter assembly first, then the deodorizing filter.
Set the filter at the deodorizing filter set position.
Check if the operation and the fan have stopped
While operating, press the power button and stop operation.
1
2
3
4
5
CAUTION
Use only a genuine filter for the Hitachi Air
PurifierOther filters may cause unit to malfunction.
CAUTION
If the filter is set while without removing its plastic packaging, it will not be able to
have a cleaning effect. It will also cause unit malfunction.
The vibration during transporting the unit might cause deodorizing agent granules to
fall out from the filter.
When removing the plastic cover of the filter and attaching the filter to the unit,
make sure that your hands, clothes, and the surroundings does not get dirty.
Wipe off any granules that may have fallen or clung to the filter.
This will not affect the deodorizing performance.
Filter assembly
Deodorizing filter
Filter assembly
Deodorizing filter
CAUTION
Do not put excessive force and deform the filter assembly. If the
filter assembly is deformed, it will not be detected by the unit.
“ ” will be displayed on the temperature / humidity monitor,
and the unit will not be able to operate. (P.E-39)
Deodorizing filter set position
Deodorizing filter set position
Unit tab
Deodorizing filter tab
While pressing the tabs on the unit, set the
deodorizing filter and hook the tabs of the
deodorizing filter with the tabs of the unit.
Replacing the Filter Assembly / Deodorizing Filter
(Continued)
EP-A9000_EN.indd 38EP-A9000_EN.indd 38 11/18/2014 11:02:19 AM11/18/2014 11:02:19 AM
Loading ...
Loading ...
Loading ...