Loading ...
Loading ...
Loading ...
•
Problems Solutions
The robot found the charging dock,
but could not recharge normally.
The main brush does not rotate
normally.
Suction power is weak.
The robot cannot return to the
Charging Dock.
Ensure that the robot is not stopped
midway, otherwise it will return to the
last starting point and stop after the
cleaning is finished.
• When the robot is near the Charging
Dock, it will return more quickly.
However, if the Charging Dock is
located far away, robot will need more
time to return. Please be patient as it
works its way back.
•
Check if the indicator on the Charging
Dock lights up. If not, contact the ILIFE
service center to repair or replace the
Charging Dock.
•
Ensure to install the left and right side
brush on to their respective pins.
(yellow-left,blue-right.)
•
Clean the charging pins regularly with
a dry cloth.
•
Check if you can hear a beep when
robot is docked onto the Charging Dock.
If not, contact the ILIFE service center
to repair or replace the Charging Dock.
•
Check if any obstacle are blocking the
suction inlet.
•
Empty and clean the dustbin regularly.
•
Clean the filters with a vacuum cleaner
or a cleaning comb.
•
If the filters are wet due to water or
other liquid on the floor，please replace
the new filter .
•
Check if the main brush is entangled by
the hair and dirt,remove the hair and
dirt by the cleaning comb.
•
Check if the main brush and brush
cover have been installed properly.
EN
26
Loading ...
Loading ...
Loading ...