Loading ...
Loading ...
Loading ...
14 INSTALLATION
Reversing Doors
This feature is only available on some models.
Your appliance is designed with reversible
doors, so that they may open from either the left
of right hand side to suit your kitchen design.
NOTE
• Door reversal must be done by an authorized
installer or service person. If it is not, the
doors will not be covered by the warranty.
Leveling
The refrigerator has two front leveling legs.
Adjust the legs to alter the tilt from front-to-
back or side-to side. If the refrigerator seems
unsteady, or the doors do not close easily,
adjust the refrigerator’s tilt using the instructions
below:
1
Turn the leveling leg to the left to raise that
side of the refrigerator or to the right to lower
it. It may take several turns of the leveling
leg to adjust the tilt of the refrigerator.
2
Open both doors and check to make sure
that they close easily. If the doors do not
close easily, tilt the refrigerator slightly more
to the rear by turning both leveling legs to
the left. It may take several more turns, and
be sure to turn both leveling legs the same
amount.
Turning on the Power
• After installing, plug the refrigerator’s power
cord into a 3-prong grounded outlet and push
the refrigerator into the final position.
CAUTION
• Connect to a rated power outlet.
• Have a certified electrician check the wall
outlet and wiring for proper grounding.
• Do not damage or cut off the ground
terminal of the power plug.
Position the Refrigerator
• Arrange the coil of tubing so that it does not
vibrate against the back of the refrigerator or
against the wall. Push the refrigerator back to
the wall.
Loading ...
Loading ...
Loading ...