Loading ...
Loading ...
Loading ...
8 9
To Lock the Lid in Place: Position the lid on the container with the lid flaps
midway between the spout and the handle. Push the lid onto the container until
it locks into place. The lid must always be secured when processing, especially
when blending hot liquids that may scald. Never operate the blender without
checking to make sure that the lid is securely locked in place.
To Remove the Lid: Lift up on one lid flap, while holding the container securely.
To Remove the Lid Plug: Rotate the lid plug anti-clockwise from the “locked” to
the “unlocked” position and lift out.
Power Cord: Your machine is equipped with a long power cord. Store the unused
portion neatly underneath. Plastic cable retainers hold the cord securely. They are
flexible and return to position after the cord is lifted out.
PARTS AND FEATURES
WARNING
Rotating Blades Can
CauseSevereInjury.
DO NOT reach into the container while
the machine is running.
CONTROLS
1
2
On / O Switch:
The On / O (or Power) Switch is located on the lower right-hand side of the
machine. The On / O Switch controls the power to the machine.
BEFORE moving the On / O Switch to the On (I) position, make sure that
the marker on the Variable Speed Dial is pointed at the Stop Symbol (
) at
the top of the dial.
After plugging in the unit, move the On / O Switch to the On position to
ready the machine for blending. Move the On / O Switch to the O position
at night and whenever the machine is left unattended.
If the On / O switch is moved to the O position to stop a programme mid-
cycle, wait 30 seconds for power to recycle and the timer to reset before
moving the On / O switch back to the On position.
When the Pulse, Start / Stop, and Programme Symbols brighten, the On / O
Switch is in the On position and power is flowing.
Start (
) / Stop ( ) Switch:
After the marker on the Variable-Speed Dial is rotated from the Stop Symbol
(
) either to Variable Speed 1 or a Programme setting, press the Start / Stop
Switch to start the machine and initiate the blending process. Pressing the
Start / Stop Switch again will stop the blending process.
Programmes can be interrupted by pushing down the Start / Stop switch
at any time. If reactivated by pushing down the Start / Stop switch, the
programme will start at the beginning.
23
4
5
OFF
ON
1
Loading ...
Loading ...
Loading ...