Loading ...
Loading ...
Loading ...
16 17
OPERATING INSTRUCTIONS
Dry-Blade Container
Before using this container with programmes or the Variable-Speed option,
always begin with the Variable-Speed Dial pointing to the Stop Symbol (
) at
the top of the dial.
If purchased, your dry-blade container should be used only for hard, dry
materials, such as grain, and for kneading dough.
1. Load the container before placing it on the motor base.
2. Fasten the 2-part lid securely. Always use the complete 2-part lid when
blending (unless the tamper is inserted through the lid cap opening).
3. With the motor o, set the dry-blade container on the motor base by
aligning it over the centring pad. Never attempt to put a container onto
an operating motor base or to operate a motor base without a container
properly in place.
4. To begin, make sure that the On/O switch is in the On position.
5. Use the Variable-Speed dial to select a function.
• Variable Speed - Rotate the dial to the right of centre to Variable
Speed 1.
• Programmes - Rotate the dial to the left of centre to the
desired programme.
6. Activate the machine by pressing the Start/Stop Switch. Your container
will shift and align itself.
• Variable Speed - slowly increase the Variable Speed to the
desired speed.
• Programmes - The programme blending speeds and duration vary and
will stop automatically at the end of the programme. Programmes can
be interrupted by pushing down the Start/Stop switch at any time. If
reactivated by pushing down the Start/Stop switch, the programme
will start at the beginning.
6. Activate the blades by pressing the Start/Stop Switch. Your container may
shift as it is aligned.
• Variable Speed - slowly rotate the Variable Speed dial to the right to the
desired speed.
• Programmes - The programme blending speeds and duration vary and
will stop automatically at the end of the programme. Programmes can
be interrupted by pushing down the Start/Stop switch at any time. If
reactivated by pushing down the Start/Stop switch, the programme will
start at the beginning.
7. If the mixture stops circulating, you may have trapped an air bubble. To
resolve, insert the tamper through the lid cap and stir until it “burps”. If
this does not work, press the On/O switch to stop the motor. Remove
the container from the motor base and use a rubber spatula to press the
air bubble away from the blades. Return the container to the motor base,
replace the lid and continue blending.
8. Take proper care when handling and processing hot ingredients and when
making hot soup and sauces.
CAUTION
To Avoid Possible Burns, Never
Start on Speeds Above 1 when
Processing Hot Liquids.
Escaping steam, splashes or contents
may scald.
To secure the contents, lock the lid
and lid plug securely in place prior to
operating the machine.
Always start on Variable 1, then slowly
increase to 10.
OPERATING INSTRUCTIONS
9. Due to the machine’s speed, processing times are much quicker than with
standard appliances. Until you are accustomed to the machine, time things
carefully to avoid over-processing.
10. After pressing the Start/Stop switch to stop the cycle, wait until the blades
stop completely before removing the lid or container from the motor base.
Loading ...
Loading ...
Loading ...