Owner’s Manual
Read and save these instructions
Vitamix Australia
167 King Street
Newcastle
NSW2300 Australia
1-800-766437 (AUS)
050-853-0697 (NZ)
vitamix.com.au
Vita-Mix
®
Corporation
8615 Usher Road
Cleveland, OH 44138-2103 U.S.A.
1.800.848.2649 / 1.440.235.4840
vitamix.com
PROFESSIONAL SERIES™ 750
2 3
Congratulations!
You are about to see how quick, easy and delicious healthy eating can be!
Before first use:
1. Please read all the safety information, warnings and instructional material
found in this booklet.
2. Set your Vitamix machine on a dry, level surface.
3. Make sure the power switch is set to O. Plug the machine into an
grounded electrical outlet.
4. Follow the cleaning instructions on page 18 to prepare your machine
for use.
LET’S GET STARTED
CONTENTS
Contents .................................................................................................................2
Let’s Get Started .................................................................................................3
Symbols ..................................................................................................................3
Service and Registration ..................................................................................4
Important Instructions for Safe Use ............................................................5
Parts and Features .............................................................................................7
Controls ..................................................................................................................9
About the Blades ............................................................................................... 11
Tamper .................................................................................................................. 12
How to Use the Tamper.................................................................................. 13
Hints for Setting Speeds ................................................................................14
Operating Instructions .................................................................................... 15
Care and Cleaning ............................................................................................ 18
Troubleshooting ................................................................................................20
Warranty ............................................................................................................... 21
Specifications .................................................................................................... 24
SYMBOLS
Warning
Read and understand
owner’s manual
Electrical shock
hazard
Unplug while not in use, before cleaning, changing
accessories or approaching parts that move in use
High temperature
when blending hot
liquids.
Operate with lid and
lid plug in place
Never touch moving
parts. Keep hands and
utensils out of container.
Do not insert items
into container while
blender is in use
Do not immerse
2 3
Congratulations!
You are about to see how quick, easy and delicious healthy eating can be!
Before first use:
1. Please read all the safety information, warnings and instructional material
found in this booklet.
2. Set your Vitamix machine on a dry, level surface.
3. Make sure the power switch is set to O. Plug the machine into an
grounded electrical outlet.
4. Follow the cleaning instructions on page 18 to prepare your machine
for use.
LET’S GET STARTED
CONTENTS
Contents .................................................................................................................2
Let’s Get Started .................................................................................................3
Symbols ..................................................................................................................3
Service and Registration ..................................................................................4
Important Instructions for Safe Use ............................................................5
Parts and Features .............................................................................................7
Controls ..................................................................................................................9
About the Blades ............................................................................................... 11
Tamper .................................................................................................................. 12
How to Use the Tamper.................................................................................. 13
Hints for Setting Speeds ................................................................................14
Operating Instructions .................................................................................... 15
Care and Cleaning ............................................................................................ 18
Troubleshooting ................................................................................................20
Warranty ............................................................................................................... 21
Specifications .................................................................................................... 24
SYMBOLS
Warning
Read and understand
owner’s manual
Electrical shock
hazard
Unplug while not in use, before cleaning, changing
accessories or approaching parts that move in use
High temperature
when blending hot
liquids.
Operate with lid and
lid plug in place
Never touch moving
parts. Keep hands and
utensils out of container.
Do not insert items
into container while
blender is in use
Do not immerse
4 5
SERVICE AND REGISTRATION
Record the model number and serial number of your Vitamix in the spaces
provided below for future reference. These numbers can be found on the back
of the motor base.
Model Number
Serial Number
Date of Purchase
Purchased From
If you purchased your Vitamix® machine directly from the Vita-Mix® Corporation via
the company’s website or call center by phone, your product was registered at the
time of purchase and your Vitamix machine’s warranty has been activated.
Your machine is not yet registered with Vitamix if you:
1. Purchased from a retail or wholesale store
2. Received your Vitamix machine as a gift
3. Are not the original owner of the machine
Enjoy faster and easier service in the future by taking a few minutes to register your
Vitamix machine today.
Choose one of these easy ways to register your machine:
1. Online at vitamix.com.au
2. Email [email protected]om.au or [email protected].nz
3. Call 1-800-766437 (AUS) or 050-853-0697 (NZ)
Your warranty may be honored by Vita-Mix
®
Manufacturing.
Failure to register your machine will not diminish your warranty rights.
IMPORTANT INSTRUCTIONS
FOR SAFE USE
READ ALL INSTRUCTIONS, SAFEGUARDS, AND
WARNINGS BEFORE OPERATING BLENDER.
1. Read all instructions.
2. Not intended for use by or near children or persons with reduced physical,
sensory, or mental capabilities or lack of experience and knowledge. Close
supervision is necessary when any appliance is used by or near children or
incapacitated persons.
3. Children should be supervised to ensure that they do not play with the appliance.
4. To protect against the risk of electrical shock, do not put the blender base in
water or other liquid.
5. Unplug from outlet when not in use, before putting on or taking o parts, and
before cleaning.
6. Avoid contacting moving parts.
7. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or is dropped or damaged in any manner. Call Vitamix Customer
Service at 1.800.848.2649 or 1.440.235.4840 or email service@vitamix.com at
once for examination, repair, replacement, or electrical or mechanical adjustment.
If purchased outside the U.S.A. or Canada, contact your local Vitamix dealer.
8. Alteration or modification of any part of the blender base or container, including
the use of any part or parts that are not genuine authorized Vitamix parts, may
cause fire, electric shock, or injury.
9. The use of attachments not expressly authorized or sold by Vitamix for use with
this blender, including canning jars, may cause fire, electric shock, or injury.
10. Do not use outdoors.
11. Do not let cord hang over edge of table or counter.
12. Do not let cord contact hot surface, including the stove.
13. Keep hands and utensils out of container while blending to reduce the risk of
severe injury to persons or damage to the blender. A rubber scraper or spatula
may be used, but only when the Vitamix blender is not running.
14. The tamper provided must be used only when the main part of the lid is in place.
15. Blades are sharp. Handle or remove blade and blade assembly from the
container with extreme care to avoid injury. To reduce the risk of injury, never
place a blade assembly on the motor base unless assembled to the Vitamix
container.
16. Do not leave foreign objects, such as spoons, forks, knives or the lid plug, in the
container as this will damage the blades and other components when starting
the machine and may cause injury.
17. Never attempt to operate with damaged blades.
18. Care shall be taken when handling the sharp cutting blades when emptying the
bowl and during cleaning.
WARNING: To avoid the risk of serious injury when using your
Vitamix® blender, basic safety precautions should be followed, including
the following.
For customer service in Australia and New Zealand, please contact:
Vitamix Australia
167 King Street
Newcastle
NSW2300 Australia
1-800-766437 (AUS)
050-853-0697 (NZ)
vitamix.com.au
Service@Vitamix.com.au or Service@Vitamix.co.nz
4 5
SERVICE AND REGISTRATION
Record the model number and serial number of your Vitamix in the spaces
provided below for future reference. These numbers can be found on the back
of the motor base.
Model Number
Serial Number
Date of Purchase
Purchased From
If you purchased your Vitamix® machine directly from the Vita-Mix® Corporation via
the company’s website or call center by phone, your product was registered at the
time of purchase and your Vitamix machine’s warranty has been activated.
Your machine is not yet registered with Vitamix if you:
1. Purchased from a retail or wholesale store
2. Received your Vitamix machine as a gift
3. Are not the original owner of the machine
Enjoy faster and easier service in the future by taking a few minutes to register your
Vitamix machine today.
Choose one of these easy ways to register your machine:
1. Online at vitamix.com.au
2. Email service@vitamix.com.au or service@vitamix.co.nz
3. Call 1-800-766437 (AUS) or 050-853-0697 (NZ)
Your warranty may be honored by Vita-Mix
®
Manufacturing.
Failure to register your machine will not diminish your warranty rights.
IMPORTANT INSTRUCTIONS
FOR SAFE USE
READ ALL INSTRUCTIONS, SAFEGUARDS, AND
WARNINGS BEFORE OPERATING BLENDER.
1. Read all instructions.
2. Not intended for use by or near children or persons with reduced physical,
sensory, or mental capabilities or lack of experience and knowledge. Close
supervision is necessary when any appliance is used by or near children or
incapacitated persons.
3. Children should be supervised to ensure that they do not play with the appliance.
4. To protect against the risk of electrical shock, do not put the blender base in
water or other liquid.
5. Unplug from outlet when not in use, before putting on or taking o parts, and
before cleaning.
6. Avoid contacting moving parts.
7. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or is dropped or damaged in any manner. Call Vitamix Customer
Service at 1.800.848.2649 or 1.440.235.4840 or email [email protected]om at
once for examination, repair, replacement, or electrical or mechanical adjustment.
If purchased outside the U.S.A. or Canada, contact your local Vitamix dealer.
8. Alteration or modification of any part of the blender base or container, including
the use of any part or parts that are not genuine authorized Vitamix parts, may
cause fire, electric shock, or injury.
9. The use of attachments not expressly authorized or sold by Vitamix for use with
this blender, including canning jars, may cause fire, electric shock, or injury.
10. Do not use outdoors.
11. Do not let cord hang over edge of table or counter.
12. Do not let cord contact hot surface, including the stove.
13. Keep hands and utensils out of container while blending to reduce the risk of
severe injury to persons or damage to the blender. A rubber scraper or spatula
may be used, but only when the Vitamix blender is not running.
14. The tamper provided must be used only when the main part of the lid is in place.
15. Blades are sharp. Handle or remove blade and blade assembly from the
container with extreme care to avoid injury. To reduce the risk of injury, never
place a blade assembly on the motor base unless assembled to the Vitamix
container.
16. Do not leave foreign objects, such as spoons, forks, knives or the lid plug, in the
container as this will damage the blades and other components when starting
the machine and may cause injury.
17. Never attempt to operate with damaged blades.
18. Care shall be taken when handling the sharp cutting blades when emptying the
bowl and during cleaning.
WARNING: To avoid the risk of serious injury when using your
Vitamix® blender, basic safety precautions should be followed, including
the following.
For customer service in Australia and New Zealand, please contact:
Vitamix Australia
167 King Street
Newcastle
NSW2300 Australia
1-800-766437 (AUS)
050-853-0697 (NZ)
vitamix.com.au
Service@Vitamix.com.au or Service@Vitamix.co.nz
6 7
IMPORTANT INSTRUCTIONS
FOR SAFE USE
WARNING
To Avoid Injury.
Read and understand instruction manual
before using this machine.
IMPORTANT INSTRUCTIONS FOR SAFE USE
This product is intended for HOUSEHOLD USE ONLY and is not intended to be
used for commercial purposes.
Do not leave your Vitamix blender unattended when operating.
Any repair, servicing, or the replacement of parts must be performed by Vitamix
or an authorized service representative.
WARNING
Electrical Shock Hazard.
Use grounded outlet only.
DO NOT remove ground.
DO NOT use an adapter.
DO NOT use an extension cord.
Always unplug before cleaning the
motor base or when not in use.
Do not put the motor base in water or
otherliquid.
Failure to follow instructions can cause
death or electrical shock.
SAVE THESE INSTRUCTIONS
NOTICE: THE FAILURE TO FOLLOW ANY OF THE IMPORTANT SAFEGUARDS
AND THE IMPORTANT INSTRUCTIONS FOR SAFE USE IS A MISUSE OF YOUR
VITAMIX BLENDER THAT CAN VOID YOUR WARRANTY AND CREATE THE RISK
OF SERIOUS INJURY.
19. Always operate blender with lid and lid plug firmly in place. The lid plug should
be removed only when adding ingredients and when using the tamper.
20. When blending hot liquids or ingredients, use caution; spray or escaping
steam may cause scalding and burns. Do not fill container to the maximum
capacity. Always begin processing on the lowest speed setting, variable
speed 1. Keep hands and other exposed skin away from the lid opening to
prevent possible burns.
21. When making nut butters or oil-based foods, do not process for more than
one minute after the mixture starts to circulate in the container. Processing
for longer periods can cause dangerous overheating.
PARTS AND FEATURES
1
Control Panel: For more information, refer to Control Panel on Page 9.
CAUTION: Lids and tampers are not interchangeable between dierent
container styles, types and sizes. For more information, refer to Tamper on
Page 12.
2
64-oz. capacity container with 2-part lid:
• Always use the lid and the lid plug when the machine is in operation
• Never operate the blender without checking to make sure that the lid
is securely locked in place.
• Ounces, Milliliters and Cups are clearly marked.
• Insert the lid plug through the lid and secure by turning clockwise.
• Remove the lid plug to use the tamper or to add ingredients.
3
Tamper: Using the tamper maintains circulation by preventing air pockets
from forming during blending.
2
3
1
6 7
IMPORTANT INSTRUCTIONS
FOR SAFE USE
WARNING
To Avoid Injury.
Read and understand instruction manual
before using this machine.
IMPORTANT INSTRUCTIONS FOR SAFE USE
This product is intended for HOUSEHOLD USE ONLY and is not intended to be
used for commercial purposes.
Do not leave your Vitamix blender unattended when operating.
Any repair, servicing, or the replacement of parts must be performed by Vitamix
or an authorized service representative.
WARNING
Electrical Shock Hazard.
Use grounded outlet only.
DO NOT remove ground.
DO NOT use an adapter.
DO NOT use an extension cord.
Always unplug before cleaning the
motor base or when not in use.
Do not put the motor base in water or
otherliquid.
Failure to follow instructions can cause
death or electrical shock.
SAVE THESE INSTRUCTIONS
NOTICE: THE FAILURE TO FOLLOW ANY OF THE IMPORTANT SAFEGUARDS
AND THE IMPORTANT INSTRUCTIONS FOR SAFE USE IS A MISUSE OF YOUR
VITAMIX BLENDER THAT CAN VOID YOUR WARRANTY AND CREATE THE RISK
OF SERIOUS INJURY.
19. Always operate blender with lid and lid plug firmly in place. The lid plug should
be removed only when adding ingredients and when using the tamper.
20. When blending hot liquids or ingredients, use caution; spray or escaping
steam may cause scalding and burns. Do not fill container to the maximum
capacity. Always begin processing on the lowest speed setting, variable
speed 1. Keep hands and other exposed skin away from the lid opening to
prevent possible burns.
21. When making nut butters or oil-based foods, do not process for more than
one minute after the mixture starts to circulate in the container. Processing
for longer periods can cause dangerous overheating.
PARTS AND FEATURES
1
Control Panel: For more information, refer to Control Panel on Page 9.
CAUTION: Lids and tampers are not interchangeable between dierent
container styles, types and sizes. For more information, refer to Tamper on
Page 12.
2
64-oz. capacity container with 2-part lid:
• Always use the lid and the lid plug when the machine is in operation
• Never operate the blender without checking to make sure that the lid
is securely locked in place.
• Ounces, Milliliters and Cups are clearly marked.
• Insert the lid plug through the lid and secure by turning clockwise.
• Remove the lid plug to use the tamper or to add ingredients.
3
Tamper: Using the tamper maintains circulation by preventing air pockets
from forming during blending.
2
3
1
8 9
To Lock the Lid in Place: Position the lid on the container with the lid flaps
midway between the spout and the handle. Push the lid onto the container until
it locks into place. The lid must always be secured when processing, especially
when blending hot liquids that may scald. Never operate the blender without
checking to make sure that the lid is securely locked in place.
To Remove the Lid: Lift up on one lid flap, while holding the container securely.
To Remove the Lid Plug: Rotate the lid plug anti-clockwise from the “locked” to
the “unlocked” position and lift out.
Power Cord: Your machine is equipped with a long power cord. Store the unused
portion neatly underneath. Plastic cable retainers hold the cord securely. They are
flexible and return to position after the cord is lifted out.
PARTS AND FEATURES
WARNING
Rotating Blades Can
CauseSevereInjury.
DO NOT reach into the container while
the machine is running.
CONTROLS
1
2
On / O Switch:
The On / O (or Power) Switch is located on the lower right-hand side of the
machine. The On / O Switch controls the power to the machine.
BEFORE moving the On / O Switch to the On (I) position, make sure that
the marker on the Variable Speed Dial is pointed at the Stop Symbol (
) at
the top of the dial.
After plugging in the unit, move the On / O Switch to the On position to
ready the machine for blending. Move the On / O Switch to the O position
at night and whenever the machine is left unattended.
If the On / O switch is moved to the O position to stop a programme mid-
cycle, wait 30 seconds for power to recycle and the timer to reset before
moving the On / O switch back to the On position.
When the Pulse, Start / Stop, and Programme Symbols brighten, the On / O
Switch is in the On position and power is flowing.
Start (
) / Stop ( ) Switch:
After the marker on the Variable-Speed Dial is rotated from the Stop Symbol
(
) either to Variable Speed 1 or a Programme setting, press the Start / Stop
Switch to start the machine and initiate the blending process. Pressing the
Start / Stop Switch again will stop the blending process.
Programmes can be interrupted by pushing down the Start / Stop switch
at any time. If reactivated by pushing down the Start / Stop switch, the
programme will start at the beginning.
23
4
5
OFF
ON
1
8 9
To Lock the Lid in Place: Position the lid on the container with the lid flaps
midway between the spout and the handle. Push the lid onto the container until
it locks into place. The lid must always be secured when processing, especially
when blending hot liquids that may scald. Never operate the blender without
checking to make sure that the lid is securely locked in place.
To Remove the Lid: Lift up on one lid flap, while holding the container securely.
To Remove the Lid Plug: Rotate the lid plug anti-clockwise from the “locked” to
the “unlocked” position and lift out.
Power Cord: Your machine is equipped with a long power cord. Store the unused
portion neatly underneath. Plastic cable retainers hold the cord securely. They are
flexible and return to position after the cord is lifted out.
PARTS AND FEATURES
WARNING
Rotating Blades Can
CauseSevereInjury.
DO NOT reach into the container while
the machine is running.
CONTROLS
1
2
On / O Switch:
The On / O (or Power) Switch is located on the lower right-hand side of the
machine. The On / O Switch controls the power to the machine.
BEFORE moving the On / O Switch to the On (I) position, make sure that
the marker on the Variable Speed Dial is pointed at the Stop Symbol (
) at
the top of the dial.
After plugging in the unit, move the On / O Switch to the On position to
ready the machine for blending. Move the On / O Switch to the O position
at night and whenever the machine is left unattended.
If the On / O switch is moved to the O position to stop a programme mid-
cycle, wait 30 seconds for power to recycle and the timer to reset before
moving the On / O switch back to the On position.
When the Pulse, Start / Stop, and Programme Symbols brighten, the On / O
Switch is in the On position and power is flowing.
Start (
) / Stop ( ) Switch:
After the marker on the Variable-Speed Dial is rotated from the Stop Symbol
(
) either to Variable Speed 1 or a Programme setting, press the Start / Stop
Switch to start the machine and initiate the blending process. Pressing the
Start / Stop Switch again will stop the blending process.
Programmes can be interrupted by pushing down the Start / Stop switch
at any time. If reactivated by pushing down the Start / Stop switch, the
programme will start at the beginning.
23
4
5
OFF
ON
1
10 11
WARNING
Rotating Blades Can
CauseSevereInjury.
DO NOT reach into the container while the
machine is running.
Wet-Blade Container: Designed for processing liquids,
including juice, frozen mixtures, sauces, soup, pureés, batter,
and for wet chopping. The wet blades can also process grain
and knead dough, but they are not quite as efficient as the
dry blades in this application. See instructions for dry
container use.
Dry-Blade Container: These blades are clearly marked “D”
and are designed specifically for processing dry materials
such as grain, cereal and coffee, and are also used for
kneading bread dough. The dry blades CANNOT process
liquids efficiently. If you prepare herbs on a regular basis,
you may wish to purchase a separate dry-blade container.
D
W
D
W
The wet-blade container comes as standard with the Vitamix machine. The
blade is identified by a “W” for wet. This blade is used for most of your recipes.
Additional containers with wet or dry blades may be purchased separately.
Moving Parts
May Become
Hot with
Extended Use.
DO NOT touch.
ABOUT THE BLADES
CAUTION
CAUTION
To Avoid Possible Burns, Never Start
on Speeds Above 1 when Processing
Hot Liquids.
Escaping steam, splashes or contents
may scald.
To secure the contents, lock the lid and
lid cap securely in place prior to operating
the machine.
Always start on Variable 1, then slowly
increase to 10.
4
5
CONTROLS
3
Pulse Switch ( ):
Variable Speed: Pressing down on the Pulse Switch will cause the machine to
blend at the speed setting shown on the Variable-Speed Dial for as long as
the Pulse Switch is held down.
Programmes: The Pulse function can be used when a programme is selected.
Pushing down the Pulse switch when a programme is selected will cause
the machine to run at 50% of high power for as long as the Pulse switch is
pusheddown.
Variable-Speed Dial:
The Variable-Speed Dial serves two functions: the use of fi ve programme
settings or ten variable-speed settings.
To use programmes: rotate the Variable-Speed Dial to the left to the desired
programme.
To use Variable Speed:
a. Rotate the Variable-Speed dial to the right to 1.
b. Press down on the Start / Stop switch.
c. Rotate the Variable-Speed dial to the right or left during blending to
increase or decrease the speed of the blades.
d. At the end of the blending cycle, rotate the marker on the Variable-Speed
dial back to the Stop Symbol (
) at the top of thedial.
Programmes:
Your Professional Series 750 is equipped with fi ve programme settings for
the most commonly used recipes. Rotating the Variable-Speed Dial left of
centre allows you to select a programme for Smoothies, Frozen Desserts,
Soups, Purées and a Cleaning cycle. These programmes are optimised for
these recipe categories, but may also work well with other recipe choices.
10 11
WARNING
Rotating Blades Can
CauseSevereInjury.
DO NOT reach into the container while the
machine is running.
Wet-Blade Container: Designed for processing liquids,
including juice, frozen mixtures, sauces, soup, pureés, batter,
and for wet chopping. The wet blades can also process grain
and knead dough, but they are not quite as efficient as the
dry blades in this application. See instructions for dry
container use.
Dry-Blade Container: These blades are clearly marked “D”
and are designed specifically for processing dry materials
such as grain, cereal and coffee, and are also used for
kneading bread dough. The dry blades CANNOT process
liquids efficiently. If you prepare herbs on a regular basis,
you may wish to purchase a separate dry-blade container.
D
W
D
W
The wet-blade container comes as standard with the Vitamix machine. The
blade is identified by a “W” for wet. This blade is used for most of your recipes.
Additional containers with wet or dry blades may be purchased separately.
Moving Parts
May Become
Hot with
Extended Use.
DO NOT touch.
ABOUT THE BLADES
CAUTION
CAUTION
To Avoid Possible Burns, Never Start
on Speeds Above 1 when Processing
Hot Liquids.
Escaping steam, splashes or contents
may scald.
To secure the contents, lock the lid and
lid cap securely in place prior to operating
the machine.
Always start on Variable 1, then slowly
increase to 10.
4
5
CONTROLS
3
Pulse Switch ( ):
Variable Speed: Pressing down on the Pulse Switch will cause the machine to
blend at the speed setting shown on the Variable-Speed Dial for as long as
the Pulse Switch is held down.
Programmes: The Pulse function can be used when a programme is selected.
Pushing down the Pulse switch when a programme is selected will cause
the machine to run at 50% of high power for as long as the Pulse switch is
pusheddown.
Variable-Speed Dial:
The Variable-Speed Dial serves two functions: the use of fi ve programme
settings or ten variable-speed settings.
To use programmes: rotate the Variable-Speed Dial to the left to the desired
programme.
To use Variable Speed:
a. Rotate the Variable-Speed dial to the right to 1.
b. Press down on the Start / Stop switch.
c. Rotate the Variable-Speed dial to the right or left during blending to
increase or decrease the speed of the blades.
d. At the end of the blending cycle, rotate the marker on the Variable-Speed
dial back to the Stop Symbol (
) at the top of thedial.
Programmes:
Your Professional Series 750 is equipped with fi ve programme settings for
the most commonly used recipes. Rotating the Variable-Speed Dial left of
centre allows you to select a programme for Smoothies, Frozen Desserts,
Soups, Purées and a Cleaning cycle. These programmes are optimised for
these recipe categories, but may also work well with other recipe choices.
12 13
WARNING
Rotating Blades Can Cause
Severe Injury.
• DO NOT put hands, spatulas etc.
into the container while the machine
is running or while the container is
still on the base.
• Lids and tampers are not
interchangeable between dierent
container styles, types and sizes.
Use the tamper that was supplied
with your machine.
IMPORTANT!
• The splash disk (near the top of
the tamper) and lid prevent the
tamper from hitting the blades
when the lid is secured properly
in the locked position.
• The container should not be
more than two-thirds full when
the tamper is used during
blending.
• To avoid overheating during
blending, DO NOT use the
tamper for more than
30 consecutive seconds.
• If the food does not circulate,
the machine may have trapped
HOW TO USE THE TAMPER
an air bubble. Carefully remove the lid plug, while making sure the lid stays
firmly in place. Release the air bubble by inserting the tamper through the
lid plug opening.
• Holding the tamper straight down may not help the ingredients circulate.
If necessary, point the tamper towards the sides or corners of the container.
DO NOT try to force the tamper more deeply into the container.
CAUTION
Rotating Blades Can Cause Damage.
Lids and tampers are not interchangeable between dierent
container styles, types and sizes. Use the tamper that was
supplied with your machine.
How to Determine the Tamper to be Used with Your Container
Each type of tamper is designed to be used safely and eectively with a
particular container. If a tamper came with your container, it is the correct
tamper for the container. If a tamper did not come with your container or you
want to determine if a tamper that you already have can be used with your new
container, please compare your container with the containers and matching
tampers in the illustration below. Before using the tamper during the blending
process, verify that it is the correct tamper.
• 64 oz. / 2 L Short Containers use Tamper P/N 016041, which is approximately
11 inches long.
• 64 oz. / 2 L Tall Containers use Tamper P/N 000760, which is approximately
12-½ inches long.
• 32 oz. and 48 oz. / 0.9 L and 1.4 L Containers use Tamper P/N 015033, which is
approximately 9-¾ inches long.
To verify that you are using the correct tamper, place the lid on an empty
container, remove the lid plug and insert the tamper. If it is the correct tamper,
it should fit easily into the opening, but should not come into contact with the
blades no matter where you move the tamper inside the container. IF THE
TAMPER TOUCHES THE BLADES AT ANY ANGLE - DO NOT USE THE TAMPER
WITH YOUR CONTAINER. If you do not have the correct tamper for your
container, contact your local Vitamix Dealer.
TAMPER
64 oz. / 2,0 L (SHORT) 64 oz. / 2,0 L (TALL) 48 oz. / 1,4 L 32 oz. / 0,9 L
Tamper Splash Disk
Tamper
Blade
Assembly
Lid
12 13
WARNING
Rotating Blades Can Cause
Severe Injury.
• DO NOT put hands, spatulas etc.
into the container while the machine
is running or while the container is
still on the base.
• Lids and tampers are not
interchangeable between dierent
container styles, types and sizes.
Use the tamper that was supplied
with your machine.
IMPORTANT!
• The splash disk (near the top of
the tamper) and lid prevent the
tamper from hitting the blades
when the lid is secured properly
in the locked position.
• The container should not be
more than two-thirds full when
the tamper is used during
blending.
• To avoid overheating during
blending, DO NOT use the
tamper for more than
30 consecutive seconds.
• If the food does not circulate,
the machine may have trapped
HOW TO USE THE TAMPER
an air bubble. Carefully remove the lid plug, while making sure the lid stays
firmly in place. Release the air bubble by inserting the tamper through the
lid plug opening.
• Holding the tamper straight down may not help the ingredients circulate.
If necessary, point the tamper towards the sides or corners of the container.
DO NOT try to force the tamper more deeply into the container.
CAUTION
Rotating Blades Can Cause Damage.
Lids and tampers are not interchangeable between dierent
container styles, types and sizes. Use the tamper that was
supplied with your machine.
How to Determine the Tamper to be Used with Your Container
Each type of tamper is designed to be used safely and eectively with a
particular container. If a tamper came with your container, it is the correct
tamper for the container. If a tamper did not come with your container or you
want to determine if a tamper that you already have can be used with your new
container, please compare your container with the containers and matching
tampers in the illustration below. Before using the tamper during the blending
process, verify that it is the correct tamper.
• 64 oz. / 2 L Short Containers use Tamper P/N 016041, which is approximately
11 inches long.
• 64 oz. / 2 L Tall Containers use Tamper P/N 000760, which is approximately
12-½ inches long.
• 32 oz. and 48 oz. / 0.9 L and 1.4 L Containers use Tamper P/N 015033, which is
approximately 9-¾ inches long.
To verify that you are using the correct tamper, place the lid on an empty
container, remove the lid plug and insert the tamper. If it is the correct tamper,
it should fit easily into the opening, but should not come into contact with the
blades no matter where you move the tamper inside the container. IF THE
TAMPER TOUCHES THE BLADES AT ANY ANGLE - DO NOT USE THE TAMPER
WITH YOUR CONTAINER. If you do not have the correct tamper for your
container, contact your local Vitamix Dealer.
TAMPER
64 oz. / 2,0 L (SHORT) 64 oz. / 2,0 L (TALL) 48 oz. / 1,4 L 32 oz. / 0,9 L
Tamper Splash Disk
Tamper
Blade
Assembly
Lid
14 15
During your first few uses, you may notice a slight burning odor as the motor
is primed. This is completely normal and will dissipate quickly.
Wet-Blade Container
The Wet-Blade Container is designed for processing liquids, including juice,
frozen mixtures, sauces, soup, purées and batter.
Before using this container with Programmes or the Variable-Speed option,
always begin with the Variable-Speed Dial pointing to the Stop Symbol (
) at
the top of the dial.
1. Move the On/O switch to the On position.
2. Load the container before placing it on the motor base.
OPERATING INSTRUCTIONS
Place liquids and soft
foods in the container
first, then solid items
and, finally, ice.
Although not necessary
for blending, you may
want to cut or break
food into smaller
pieces for more precise
measurement of
ingredients.
3. Fasten the 2-part lid
securely. Always use
the complete 2-part lid
when blending (unless the tamper is inserted through the lid cap
opening). Make sure that the lid is securely latched, especially when
blending hot ingredients.
4. With the motor o, set the wet-blade container on the motor base by
aligning it over the centring pad. Never attempt to put a container onto
an operating motor base or to operate a motor base without a container
properly in place.
5. Use the Variable-Speed dial to select a function.
• Variable Speed – Rotate the dial to the right of centre to Variable
Speed 1.
• Programmes – Rotate the dial to the left of centre to the
desired programme.
HINTS FOR SETTING SPEEDS
CAUTION
To Avoid Possible Burns, Never
Start on Speeds Above 1 when
Processing Hot Liquids.
Escaping steam, splashes or contents
may scald.
To secure the contents, lock the lid
and lid plug securely in place prior to
operating the machine.
Always start on Variable 1, then slowly
increase to 10.
0
30
1545
Variable Speed
Before using Variable-Speed, always begin
with the Variable-Speed Dial marker
pointing to the Stop Symbol (
) at the top
of the dial.
1. Rotate the dial to the right to Variable
Speed 1.
2. To activate the blending process, press
When using variable speed, use the highest setting
stated in the recipe for as much of the processing time
as possible to make smoothies, soup, shakes, frozen
mixtures, purées, nut butter, and for grinding grain.
Processing times will generally be less than one minute
(most take less than 30 seconds). The higher speed
provides the best quality of refinement, breaking down
down on the Start/Stop Switch.
3. Slowly turn the Variable-Speed Dial to the desired speed, depending on the
recipe used.
4. At the end of the blending cycle, rotate the Variable-Speed dial back to the
Stop Symbol (
) at the top of the dial.
ice, frozen fruit, whole fruit or vegetables, and grains to a smooth, lump-free
consistency.
Blending for too long at too low a speed setting will overheat the machine
and cause the Automatic Overload Protection to turn o the machine.
Blending on a higher speed maximises the working of the motor’s cooling fan
to avoid overheating.
Programmes: Programme blending speeds and duration vary. The blender will stop
automatically at the end of the programme.
Variable Speed
Programmes
Liquids
Dry Goods
Leafy Greens
Fruits & Veggies
Ice & Frozen
Ingredients
14 15
During your first few uses, you may notice a slight burning odor as the motor
is primed. This is completely normal and will dissipate quickly.
Wet-Blade Container
The Wet-Blade Container is designed for processing liquids, including juice,
frozen mixtures, sauces, soup, purées and batter.
Before using this container with Programmes or the Variable-Speed option,
always begin with the Variable-Speed Dial pointing to the Stop Symbol (
) at
the top of the dial.
1. Move the On/O switch to the On position.
2. Load the container before placing it on the motor base.
OPERATING INSTRUCTIONS
Place liquids and soft
foods in the container
first, then solid items
and, finally, ice.
Although not necessary
for blending, you may
want to cut or break
food into smaller
pieces for more precise
measurement of
ingredients.
3. Fasten the 2-part lid
securely. Always use
the complete 2-part lid
when blending (unless the tamper is inserted through the lid cap
opening). Make sure that the lid is securely latched, especially when
blending hot ingredients.
4. With the motor o, set the wet-blade container on the motor base by
aligning it over the centring pad. Never attempt to put a container onto
an operating motor base or to operate a motor base without a container
properly in place.
5. Use the Variable-Speed dial to select a function.
• Variable Speed – Rotate the dial to the right of centre to Variable
Speed 1.
• Programmes – Rotate the dial to the left of centre to the
desired programme.
HINTS FOR SETTING SPEEDS
CAUTION
To Avoid Possible Burns, Never
Start on Speeds Above 1 when
Processing Hot Liquids.
Escaping steam, splashes or contents
may scald.
To secure the contents, lock the lid
and lid plug securely in place prior to
operating the machine.
Always start on Variable 1, then slowly
increase to 10.
0
30
1545
Variable Speed
Before using Variable-Speed, always begin
with the Variable-Speed Dial marker
pointing to the Stop Symbol (
) at the top
of the dial.
1. Rotate the dial to the right to Variable
Speed 1.
2. To activate the blending process, press
When using variable speed, use the highest setting
stated in the recipe for as much of the processing time
as possible to make smoothies, soup, shakes, frozen
mixtures, purées, nut butter, and for grinding grain.
Processing times will generally be less than one minute
(most take less than 30 seconds). The higher speed
provides the best quality of refinement, breaking down
down on the Start/Stop Switch.
3. Slowly turn the Variable-Speed Dial to the desired speed, depending on the
recipe used.
4. At the end of the blending cycle, rotate the Variable-Speed dial back to the
Stop Symbol (
) at the top of the dial.
ice, frozen fruit, whole fruit or vegetables, and grains to a smooth, lump-free
consistency.
Blending for too long at too low a speed setting will overheat the machine
and cause the Automatic Overload Protection to turn o the machine.
Blending on a higher speed maximises the working of the motor’s cooling fan
to avoid overheating.
Programmes: Programme blending speeds and duration vary. The blender will stop
automatically at the end of the programme.
Variable Speed
Programmes
Liquids
Dry Goods
Leafy Greens
Fruits & Veggies
Ice & Frozen
Ingredients
16 17
OPERATING INSTRUCTIONS
Dry-Blade Container
Before using this container with programmes or the Variable-Speed option,
always begin with the Variable-Speed Dial pointing to the Stop Symbol (
) at
the top of the dial.
If purchased, your dry-blade container should be used only for hard, dry
materials, such as grain, and for kneading dough.
1. Load the container before placing it on the motor base.
2. Fasten the 2-part lid securely. Always use the complete 2-part lid when
blending (unless the tamper is inserted through the lid cap opening).
3. With the motor o, set the dry-blade container on the motor base by
aligning it over the centring pad. Never attempt to put a container onto
an operating motor base or to operate a motor base without a container
properly in place.
4. To begin, make sure that the On/O switch is in the On position.
5. Use the Variable-Speed dial to select a function.
• Variable Speed - Rotate the dial to the right of centre to Variable
Speed 1.
• Programmes - Rotate the dial to the left of centre to the
desired programme.
6. Activate the machine by pressing the Start/Stop Switch. Your container
will shift and align itself.
• Variable Speed - slowly increase the Variable Speed to the
desired speed.
• Programmes - The programme blending speeds and duration vary and
will stop automatically at the end of the programme. Programmes can
be interrupted by pushing down the Start/Stop switch at any time. If
reactivated by pushing down the Start/Stop switch, the programme
will start at the beginning.
6. Activate the blades by pressing the Start/Stop Switch. Your container may
shift as it is aligned.
• Variable Speed - slowly rotate the Variable Speed dial to the right to the
desired speed.
• Programmes - The programme blending speeds and duration vary and
will stop automatically at the end of the programme. Programmes can
be interrupted by pushing down the Start/Stop switch at any time. If
reactivated by pushing down the Start/Stop switch, the programme will
start at the beginning.
7. If the mixture stops circulating, you may have trapped an air bubble. To
resolve, insert the tamper through the lid cap and stir until it “burps”. If
this does not work, press the On/O switch to stop the motor. Remove
the container from the motor base and use a rubber spatula to press the
air bubble away from the blades. Return the container to the motor base,
replace the lid and continue blending.
8. Take proper care when handling and processing hot ingredients and when
making hot soup and sauces.
CAUTION
To Avoid Possible Burns, Never
Start on Speeds Above 1 when
Processing Hot Liquids.
Escaping steam, splashes or contents
may scald.
To secure the contents, lock the lid
and lid plug securely in place prior to
operating the machine.
Always start on Variable 1, then slowly
increase to 10.
OPERATING INSTRUCTIONS
9. Due to the machine’s speed, processing times are much quicker than with
standard appliances. Until you are accustomed to the machine, time things
carefully to avoid over-processing.
10. After pressing the Start/Stop switch to stop the cycle, wait until the blades
stop completely before removing the lid or container from the motor base.
16 17
OPERATING INSTRUCTIONS
Dry-Blade Container
Before using this container with programmes or the Variable-Speed option,
always begin with the Variable-Speed Dial pointing to the Stop Symbol (
) at
the top of the dial.
If purchased, your dry-blade container should be used only for hard, dry
materials, such as grain, and for kneading dough.
1. Load the container before placing it on the motor base.
2. Fasten the 2-part lid securely. Always use the complete 2-part lid when
blending (unless the tamper is inserted through the lid cap opening).
3. With the motor o, set the dry-blade container on the motor base by
aligning it over the centring pad. Never attempt to put a container onto
an operating motor base or to operate a motor base without a container
properly in place.
4. To begin, make sure that the On/O switch is in the On position.
5. Use the Variable-Speed dial to select a function.
• Variable Speed - Rotate the dial to the right of centre to Variable
Speed 1.
• Programmes - Rotate the dial to the left of centre to the
desired programme.
6. Activate the machine by pressing the Start/Stop Switch. Your container
will shift and align itself.
• Variable Speed - slowly increase the Variable Speed to the
desired speed.
• Programmes - The programme blending speeds and duration vary and
will stop automatically at the end of the programme. Programmes can
be interrupted by pushing down the Start/Stop switch at any time. If
reactivated by pushing down the Start/Stop switch, the programme
will start at the beginning.
6. Activate the blades by pressing the Start/Stop Switch. Your container may
shift as it is aligned.
• Variable Speed - slowly rotate the Variable Speed dial to the right to the
desired speed.
• Programmes - The programme blending speeds and duration vary and
will stop automatically at the end of the programme. Programmes can
be interrupted by pushing down the Start/Stop switch at any time. If
reactivated by pushing down the Start/Stop switch, the programme will
start at the beginning.
7. If the mixture stops circulating, you may have trapped an air bubble. To
resolve, insert the tamper through the lid cap and stir until it “burps”. If
this does not work, press the On/O switch to stop the motor. Remove
the container from the motor base and use a rubber spatula to press the
air bubble away from the blades. Return the container to the motor base,
replace the lid and continue blending.
8. Take proper care when handling and processing hot ingredients and when
making hot soup and sauces.
CAUTION
To Avoid Possible Burns, Never
Start on Speeds Above 1 when
Processing Hot Liquids.
Escaping steam, splashes or contents
may scald.
To secure the contents, lock the lid
and lid plug securely in place prior to
operating the machine.
Always start on Variable 1, then slowly
increase to 10.
OPERATING INSTRUCTIONS
9. Due to the machine’s speed, processing times are much quicker than with
standard appliances. Until you are accustomed to the machine, time things
carefully to avoid over-processing.
10. After pressing the Start/Stop switch to stop the cycle, wait until the blades
stop completely before removing the lid or container from the motor base.
18 19
CARE AND CLEANING
To prepare your new machine for initial use, follow
the steps under Normal Cleaning, below. This will
clean the unit and break in the motor.
During your first few uses, you may notice a slight
burning odor as the motor is primed.
This is completely normal and will dissipate quickly.
Container
To prepare your new machine for initial use, follow the steps under Normal
Cleaning, below. This will clean the unit and break in the motor.
CARE AND CLEANING
Normal Cleaning:
Before using the Variable-Speed option, always begin with the Variable-Speed
Dial marker pointing to the Stop Symbol (
) at the top of the dial.
1. Fill the container half full of warm water and add a few drops of washing-up
liquid to the container.
2. Snap or push the complete 2-part lid into the locked position.
3. Perform one of the following procedures:
• Variable Speed:
a. Rotate the Variable-Speed dial to 1.
b. Press the Start / Stop switch.
c. Slowly increase variable speed to 10.
d. Run the machine for 30 to 60 seconds.
e. Rotate the Variable-Speed dial to the Stop Symbol (
) at the top of
the dial.
• Programme:
a. Rotate the Variable-Speed dial to the Cleaning (
) programme
icon. The Cleaning (
) programme will run for approximately
1minute.
b. After the programme stops, rotate the Variable-Speed dial to the
Stop Symbol (
) at the top of the dial.
4. Rinse and drain the container.
To Sanitise:
Before using the Variable-Speed option, always begin with the Variable-Speed
Dial marker pointing to the Stop Symbol (
) at the top of the dial.
1. Follow the cleaning instructions above.
2. Fill the container half full of water and add 1 ½ teaspoons of liquid bleach.
3. Snap or push the complete 2-part lid into the locked position.
4. Perform one of the following procedures:
• Variable Speed:
a. Rotate the Variable-Speed dial to 1.
b. Press the Start / Stop switch.
c. Slowly increase variable speed to 10.
d. Run the machine for 30 to 60 seconds.
e. Rotate the Variable-Speed dial to the Stop Symbol (
) at the top
of the dial.
• Programme:
a. Rotate the Variable-Speed dial to the Cleaning (
) programme
icon. The Cleaning (
) programme will run for approximately
1minute.
b. After the programme stops, rotate the Variable-Speed dial to the
Stop Symbol (
) at the top of the dial.
5. Allow the mixture to stand in the container for an additional 1 ½ minutes.
6. Pour out bleach mixture. Allow container to air dry.
7. Do not rinse after sanitising.
Lid, Lid Cap and Tamper
Separate the lid and lid cap. Wash parts in warm, soapy water. Rinse clean under
running water and dry. Reassemble before use.
IMPORTANT: To ensure continued and eective performance, do not put the
container, lid, lid cap or tamper in the dishwasher.
Motor Base
1. Unplug the power cable.
WARNING
Electrical Shock Hazard.
Always unplug before cleaning the
motor base or when not in use.
Do not put the motor base in water or
otherliquid.
Failure to follow instructions can cause
death or electrical shock.
18 19
CARE AND CLEANING
To prepare your new machine for initial use, follow
the steps under Normal Cleaning, below. This will
clean the unit and break in the motor.
During your first few uses, you may notice a slight
burning odor as the motor is primed.
This is completely normal and will dissipate quickly.
Container
To prepare your new machine for initial use, follow the steps under Normal
Cleaning, below. This will clean the unit and break in the motor.
CARE AND CLEANING
Normal Cleaning:
Before using the Variable-Speed option, always begin with the Variable-Speed
Dial marker pointing to the Stop Symbol (
) at the top of the dial.
1. Fill the container half full of warm water and add a few drops of washing-up
liquid to the container.
2. Snap or push the complete 2-part lid into the locked position.
3. Perform one of the following procedures:
• Variable Speed:
a. Rotate the Variable-Speed dial to 1.
b. Press the Start / Stop switch.
c. Slowly increase variable speed to 10.
d. Run the machine for 30 to 60 seconds.
e. Rotate the Variable-Speed dial to the Stop Symbol (
) at the top of
the dial.
• Programme:
a. Rotate the Variable-Speed dial to the Cleaning (
) programme
icon. The Cleaning (
) programme will run for approximately
1minute.
b. After the programme stops, rotate the Variable-Speed dial to the
Stop Symbol (
) at the top of the dial.
4. Rinse and drain the container.
To Sanitise:
Before using the Variable-Speed option, always begin with the Variable-Speed
Dial marker pointing to the Stop Symbol (
) at the top of the dial.
1. Follow the cleaning instructions above.
2. Fill the container half full of water and add 1 ½ teaspoons of liquid bleach.
3. Snap or push the complete 2-part lid into the locked position.
4. Perform one of the following procedures:
• Variable Speed:
a. Rotate the Variable-Speed dial to 1.
b. Press the Start / Stop switch.
c. Slowly increase variable speed to 10.
d. Run the machine for 30 to 60 seconds.
e. Rotate the Variable-Speed dial to the Stop Symbol (
) at the top
of the dial.
• Programme:
a. Rotate the Variable-Speed dial to the Cleaning (
) programme
icon. The Cleaning (
) programme will run for approximately
1minute.
b. After the programme stops, rotate the Variable-Speed dial to the
Stop Symbol (
) at the top of the dial.
5. Allow the mixture to stand in the container for an additional 1 ½ minutes.
6. Pour out bleach mixture. Allow container to air dry.
7. Do not rinse after sanitising.
Lid, Lid Cap and Tamper
Separate the lid and lid cap. Wash parts in warm, soapy water. Rinse clean under
running water and dry. Reassemble before use.
IMPORTANT: To ensure continued and eective performance, do not put the
container, lid, lid cap or tamper in the dishwasher.
Motor Base
1. Unplug the power cable.
WARNING
Electrical Shock Hazard.
Always unplug before cleaning the
motor base or when not in use.
Do not put the motor base in water or
otherliquid.
Failure to follow instructions can cause
death or electrical shock.
20 21
7-Year Full Machine Warranty
1. PRODUCT REGISTRATION.
Vita-Mix® Manufacturing (“Vitamix”) strongly encourages you to register your
purchase by completing and returning the product registration card that came
with this Machine. You can register online at vitamix.com/warranty; or by
calling our Customer Service Department at 1.800.848.2649 or 1.440.235.4840.
Failure to register your product purchase will not diminish your warranty rights.
However, registering your purchase will allow Vitamix to better serve you with
any of your customer service needs.
2. WHO CAN SEEK WARRANTY COVERAGE.
This Warranty is extended by Vitamix to the owner of this Machine for
personal household use only. This Warranty does not apply to products
used for commercial, rental or re-sale purposes. Should ownership of the
machine change during the 7-year period, please update the Machine’s owner
information at vitamix.com/warranty.
3. WHAT IS COVERED.
Vitamix warrants to the owner that if this Machine (a “Machine” consists of
a motor blender base and any containers purchased together) fails within 7
years from the date of purchase due to a defect in material or workmanship or
as a result of normal wear and tear from ordinary household use, Vitamix will,
within 30 days of receipt of the returned product, repair the failed Machine or
component part of the Machine free of charge.
If, in Vitamix’s sole discretion, the failed Machine or component part of the
Machine cannot be repaired, Vitamix will elect to either (A) replace the Machine
free of charge or (B) refund the full purchase price to the owner, unless Vitamix
receives prior written notice of the owner’s preference.
4. WHAT IS NOT COVERED.
This Warranty does not apply to Machines that have been used commercially or
in non-household applications. This Warranty does not cover cosmetic changes
that do not aect performance, such as discoloration or the eects of the use of
abrasives or cleaners or food build up. This Warranty is only valid if the Machine
is used and maintained in accordance with the instructions, warnings and
safeguards contained in the owner’s manual.
Vitamix will not be responsible for the cost of any unauthorized
warranty repairs.
REPAIR, REPLACEMENT OR REFUND OF THE PURCHASE PRICE ARE THE
EXCLUSIVE REMEDIES OF PURCHASER AND THE SOLE LIABILITY OF
VITAMIX UNDER THIS WARRANTY. NO EMPLOYEE OR REPRESENTATIVE
OF VITAMIX IS AUTHORIZED TO MAKE ANY ADDITIONAL WARRANTY OR
WARRANTY
Your Vitamix motor is designed to be protected from overheating during use.
This feature will shut o the motor. The motor will possibly emit a slight odor.
If the motor shuts o due to overheating while blending, allow the machine to
cool for 20-45 minutes before beginning another blending cycle. If you continue
to experience problems after following these instructions, contact our Customer
Service Department at 1.800.848.2649 or 1.440.235.4840. for instructions.
Tips to prevent “overloading” your Vitamix machine:
• Only process Vitamix recipes when learning to use the machine
• Do not process recipes at lower speeds than those recommended
• Do not process recipes at higher speeds than those recommended
• Do not process recipes for longer than recommended
• Use your tamper to process thicker mixtures and keep ingredients moving
around and through the blades
TROUBLESHOOTING
2. Wash the outside surface with a damp, soft cloth or sponge that has been
rinsed in a mild solution of washing-up liquid and warm water. Do not place
the motor base in water.
3. The centering pad can be removed for more thorough cleaning.
4. Thoroughly clean the switches so that they work freely. They may become
sticky from use. Moisten a cotton bud with a household degreaser or cleaner
and clean the grooves around the switches. Immediately dry all surfaces.
5. Polish with a soft cloth.
Retainer Nut Loosening
Container
Retainer Nut
Blade
Assembly
In the event that the retainer nut
at the bottom of your container
loosens and no longer holds the
blade assembly securely in place,
DO NOT CONTINUE TO USE THE
CONTAINER. Contact Vitamix
customer service immediately
for instructions.
CARE AND CLEANING
20 21
7-Year Full Machine Warranty
1. PRODUCT REGISTRATION.
Vita-Mix® Manufacturing (“Vitamix”) strongly encourages you to register your
purchase by completing and returning the product registration card that came
with this Machine. You can register online at vitamix.com/warranty; or by
calling our Customer Service Department at 1.800.848.2649 or 1.440.235.4840.
Failure to register your product purchase will not diminish your warranty rights.
However, registering your purchase will allow Vitamix to better serve you with
any of your customer service needs.
2. WHO CAN SEEK WARRANTY COVERAGE.
This Warranty is extended by Vitamix to the owner of this Machine for
personal household use only. This Warranty does not apply to products
used for commercial, rental or re-sale purposes. Should ownership of the
machine change during the 7-year period, please update the Machine’s owner
information at vitamix.com/warranty.
3. WHAT IS COVERED.
Vitamix warrants to the owner that if this Machine (a “Machine” consists of
a motor blender base and any containers purchased together) fails within 7
years from the date of purchase due to a defect in material or workmanship or
as a result of normal wear and tear from ordinary household use, Vitamix will,
within 30 days of receipt of the returned product, repair the failed Machine or
component part of the Machine free of charge.
If, in Vitamix’s sole discretion, the failed Machine or component part of the
Machine cannot be repaired, Vitamix will elect to either (A) replace the Machine
free of charge or (B) refund the full purchase price to the owner, unless Vitamix
receives prior written notice of the owner’s preference.
4. WHAT IS NOT COVERED.
This Warranty does not apply to Machines that have been used commercially or
in non-household applications. This Warranty does not cover cosmetic changes
that do not aect performance, such as discoloration or the eects of the use of
abrasives or cleaners or food build up. This Warranty is only valid if the Machine
is used and maintained in accordance with the instructions, warnings and
safeguards contained in the owner’s manual.
Vitamix will not be responsible for the cost of any unauthorized
warranty repairs.
REPAIR, REPLACEMENT OR REFUND OF THE PURCHASE PRICE ARE THE
EXCLUSIVE REMEDIES OF PURCHASER AND THE SOLE LIABILITY OF
VITAMIX UNDER THIS WARRANTY. NO EMPLOYEE OR REPRESENTATIVE
OF VITAMIX IS AUTHORIZED TO MAKE ANY ADDITIONAL WARRANTY OR
WARRANTY
Your Vitamix motor is designed to be protected from overheating during use.
This feature will shut o the motor. The motor will possibly emit a slight odor.
If the motor shuts o due to overheating while blending, allow the machine to
cool for 20-45 minutes before beginning another blending cycle. If you continue
to experience problems after following these instructions, contact our Customer
Service Department at 1.800.848.2649 or 1.440.235.4840. for instructions.
Tips to prevent “overloading” your Vitamix machine:
• Only process Vitamix recipes when learning to use the machine
• Do not process recipes at lower speeds than those recommended
• Do not process recipes at higher speeds than those recommended
• Do not process recipes for longer than recommended
• Use your tamper to process thicker mixtures and keep ingredients moving
around and through the blades
TROUBLESHOOTING
2. Wash the outside surface with a damp, soft cloth or sponge that has been
rinsed in a mild solution of washing-up liquid and warm water. Do not place
the motor base in water.
3. The centering pad can be removed for more thorough cleaning.
4. Thoroughly clean the switches so that they work freely. They may become
sticky from use. Moisten a cotton bud with a household degreaser or cleaner
and clean the grooves around the switches. Immediately dry all surfaces.
5. Polish with a soft cloth.
Retainer Nut Loosening
Container
Retainer Nut
Blade
Assembly
In the event that the retainer nut
at the bottom of your container
loosens and no longer holds the
blade assembly securely in place,
DO NOT CONTINUE TO USE THE
CONTAINER. Contact Vitamix
customer service immediately
for instructions.
CARE AND CLEANING
22 23
WARRANTY
For customer service in Australia and New Zealand, please contact:
Vitamix Australia
167 King Street
Newcastle
NSW2300 Australia
1-800-766437 (AUS)
050-853-0697 (NZ)
vitamix.com.au
Service@Vitamix.com.au
Service@Vitamix.co.nz
WARRANTY
ANY MODIFICATION TO THIS WARRANTY WHICH MAY BE BINDING UPON
VITAMIX. ACCORDINGLY, PURCHASER SHOULD NOT RELY UPON ANY
ADDITIONAL STATEMENTS MADE BY ANY EMPLOYEE OR REPRESENTATIVE
OF VITAMIX. IN NO EVENT, WHETHER BASED ON CONTRACT, INDEMNITY,
WARRANTY, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR
OTHERWISE, SHALL VITAMIX BE LIABLE FOR ANY SPECIAL, INDIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING, WITHOUT
LIMITATION, LOSS OF PROFIT OR REVENUE.
Some states do not allow limits on warranties. In such states, the above
limitations may not apply to you. Outside the U.S.A. and Canada, other
warranties may apply.
5. WHAT VOIDS THIS WARRANTY.
Abuse, misuse, negligent use, alteration of the Machine, exposure to abnormal
or extreme conditions, or failure to follow the operating instructions will void
this Warranty.
The Warranty is also void if repairs to the Machine or any component part of the
Machine are performed by someone other than either Vitamix or an authorized
Vitamix Service Provider or if any component part of a Machine subject to this
Warranty is used in combination with a motor base or container that is not
expressly authorized by Vitamix.
6. HOW TO OBTAIN RETURN AUTHORIZATION UNDER THIS WARRANTY.
In the event that the Machine or any component part of the Machine needs
service or repair, please call Vitamix Customer Service at 1.800.848.2649 or
1.440.235.4840. You will be asked to provide a date of purchase and proof
of purchase for any product that has not been registered with Vitamix.
For product subject to this Warranty you will be provided with a return
authorization number, up-to-date shipping instructions and a pre-paid return
pick up label. Vitamix will pay standard shipping costs on the return of a
Machine or component part for warranty service and repair and for return
shipment of the product to you after the warranty repair or replacement.
Purchaser is responsible for the costs of special shipping requests.
Within the U.S.A. and Canada, this Warranty is honored directly through the
Vita-Mix® Manufacturing.
You will be deemed to have accepted the returned product “as is” upon delivery
unless you notify Vitamix of any problem, including shipment damage, within
48 hours of delivery.
22 23
WARRANTY
For customer service in Australia and New Zealand, please contact:
Vitamix Australia
167 King Street
Newcastle
NSW2300 Australia
1-800-766437 (AUS)
050-853-0697 (NZ)
vitamix.com.au
Service@Vitamix.com.au
Service@Vitamix.co.nz
WARRANTY
ANY MODIFICATION TO THIS WARRANTY WHICH MAY BE BINDING UPON
VITAMIX. ACCORDINGLY, PURCHASER SHOULD NOT RELY UPON ANY
ADDITIONAL STATEMENTS MADE BY ANY EMPLOYEE OR REPRESENTATIVE
OF VITAMIX. IN NO EVENT, WHETHER BASED ON CONTRACT, INDEMNITY,
WARRANTY, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR
OTHERWISE, SHALL VITAMIX BE LIABLE FOR ANY SPECIAL, INDIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING, WITHOUT
LIMITATION, LOSS OF PROFIT OR REVENUE.
Some states do not allow limits on warranties. In such states, the above
limitations may not apply to you. Outside the U.S.A. and Canada, other
warranties may apply.
5. WHAT VOIDS THIS WARRANTY.
Abuse, misuse, negligent use, alteration of the Machine, exposure to abnormal
or extreme conditions, or failure to follow the operating instructions will void
this Warranty.
The Warranty is also void if repairs to the Machine or any component part of the
Machine are performed by someone other than either Vitamix or an authorized
Vitamix Service Provider or if any component part of a Machine subject to this
Warranty is used in combination with a motor base or container that is not
expressly authorized by Vitamix.
6. HOW TO OBTAIN RETURN AUTHORIZATION UNDER THIS WARRANTY.
In the event that the Machine or any component part of the Machine needs
service or repair, please call Vitamix Customer Service at 1.800.848.2649 or
1.440.235.4840. You will be asked to provide a date of purchase and proof
of purchase for any product that has not been registered with Vitamix.
For product subject to this Warranty you will be provided with a return
authorization number, up-to-date shipping instructions and a pre-paid return
pick up label. Vitamix will pay standard shipping costs on the return of a
Machine or component part for warranty service and repair and for return
shipment of the product to you after the warranty repair or replacement.
Purchaser is responsible for the costs of special shipping requests.
Within the U.S.A. and Canada, this Warranty is honored directly through the
Vita-Mix® Manufacturing.
You will be deemed to have accepted the returned product “as is” upon delivery
unless you notify Vitamix of any problem, including shipment damage, within
48 hours of delivery.
To see the complete line of Vitamix
®
products,
visit vitamix.com
Vita-Mix
®
Corporation
8615 Usher Road
Cleveland, OH 44138-2103 U.S.A.
1.800.848.2649/+1.440.235.4840
vitamix.com
©2014 Vita-Mix
®
Corporation. No part of this publication may be reproduced or
transmitted in any form or by any means, or stored in a database or retrieval system,
without the written permission of the Vita-Mix® Corporation.
113576_A 12/14 ENG
SPECIFICATIONS
When applicable:
Motor:
≈ 2.2 peak output horsepower motor
Electrical:
220-240 V, 50 / 60 Hz, 1200 - 1400 W
Dimensions:
Height: 44.2 cm / 17.4 in.
Width: 19.6 cm / 7.7 in.
Depth: 23.9 cm / 9.4 in.
Professional Series™ 750
geprüfte
Sicherheit
