Loading ...
Loading ...
Loading ...
Cockpit68
Resetting a memory
– Select the memory where you wish to erase the values.
– Hold down button on the windscreen wiper lever or the button on
the multifunction* steering wheel for at least 2 seconds.
The journey memory 1 collects the travel and consumption data from the
moment the ignition is switched on until it is switched off. If the journey is
continued within two hours of switching off the ignition, the new values will
be added to the existing trip recorder memory. The memory will automatically
be deleted if the journey is interrupted for more than two hours.
The total journey memory 2 collects the journey data for any number of indi-
vidual journeys (even if the ignition is switched off for longer than two hours)
up to a total of 99 hours and 59 minutes travel time or 9999 miles distance
travelled. The memory will automatically be deleted if one of the named
values is reached.
Memory indications
The following data can be viewed on the multifunction display using the
rocker switch ⇒ page 64, fig. 42 ⇒ page 64 on the windscreen wiper
lever or by pressing button or ⇒ page 64, fig. 43 on the multifunction
steering wheel*.
• Duration
• Current fuel consumption
• Average fuel consumption
• Distance to empty (the distance you can travel with the remaining fuel)
• Distance
• Average speed
• Digital display of speed
7)
• Speed warning to --- km/h
Personal selection of display
The driver can establish which displays are shown on the instrument panel
display as required:
• Select the submenu Multifunction Display Data from the Configuration
menu ⇒ page 70.
• The displays can be activated or deactivated individually by marking the
required option and pressing the button on the windscreen wiper lever or
the multifunction steering wheel*.
Duration in h and min
The display shows the amount of time which has elapsed since the ignition
was switched on.
The maximum display value in both memories is 99 hours and 59 minutes.
The memory will automatically be deleted once this value has been reached.
Current fuel consumption in l/100km or l/h
The display will show the current fuel consumption in mpg whilst the vehicle
is in motion or in litres/hour when the vehicle is in a stationary position with
the engine running.
Using this display you can see how your driving style affects fuel consump-
tion ⇒ page 154.
Average consumption in l/100km
The average fuel consumption will be shown after a distance of approximately
100 metres has been travelled. Dashes will appear in the display until that
time. The display will be updated every 5 seconds while the vehicle is in
motion. The amount of fuel used will not be shown.
Fuel range in km
The fuel range is calculated using the figures for tank content and current fuel
consumption. It shows how far the vehicle can travel using the same condi-
tions as a reference.
7)
It is not possible to see whether the alternative speed display is activated.
A
A OK
A
B
OK
leon_ingles Seite 68 Montag, 26. Januar 2009 4:29 16
Loading ...
Loading ...
Loading ...