Loading ...
Loading ...
Loading ...
If and when 239
Safety First Operating instructions Practical tips Technical Data
Inflating the tyre.
– Remove the air compressor and hose from the container.
– Screw the retaining nut onto the valve.
– Plug the compressor cable into a 12 volt power point.
– Turn on compressor and monitor the pressure shown on the pres-
sure gauge.
Completing the repair
– Remove the compressor hose from the valve.
– Fit the valve cap.
– Unplug the compressor from the socket.
– Return all tools to their proper storing location.
Note
• If the vehicle is equipped with tyre pressure control, enter the new tyre
pressures using the SET button on the central console.
• The compressor should never be allowed to run for longer than 6
minutes.
Fuses
Changing a fuse
Blown fuses must be replaced
Fig. 156 Left side of dash
panel: Fuse box cover
Fig. 157 Fuse box cover
in engine compartment
leon_ingles Seite 239 Montag, 26. Januar 2009 4:29 16
Loading ...
Loading ...
Loading ...