Loading ...
Loading ...
Loading ...
Lights and visibility122
Switching on the rain sensor
– Move the windscreen wiper lever into position ⇒ fig. 83.
– Move the control to the left or right to set the sensitivity of the
rain sensor. Control to the right: highly sensitive. Control to the
left: less sensitive.
The rain sensor is part of the interval wipe function. You will have to switch
the rain sensor back on if you switch off the ignition. This is done by switching
the wiper intermittent function off and back on.
Note
• Do not put stickers on the windscreen in front of the sensor. This may
cause sensor disruption or faults.
Rear window wiper
The windscreen wiper lever operates the windscreen wiper
and the wash and wipe system for the rear window.
Switching on the interval wipe
– Press the lever forwards to position ⇒ fig. 84. The wiper will
wipe the window approximately every 6 seconds.
Switching off the interval wipe function
– Pull the lever back from position towards the steering wheel.
The wiper will continue to function for a short period if you switch
off whilst the wipers are in motion.
A
1
A
A
Fig. 84 Windscreen wiper
and windscreen wash
lever: rear window wiper
A
6
A
6
leon_ingles Seite 122 Montag, 26. Januar 2009 4:29 16
Loading ...
Loading ...
Loading ...