Loading ...
Loading ...
Loading ...
E-22
Replacing the Filter
Filter Replacement (Continued)
Alert Display
Symptom
Cause
All airflow indicators are blinking.
P.E-26
Use the fi lter No. EP-DX40E-902 separately available.
Before replacing the fi lter, be sure to stop the purifi er and unplug the power cord from AC outlet.
No cleaning effect is obtainable if the fi lter is installed with plastic bag.
It may also be a cause of malfunction.
Note
Faulty fan rotation.
Stop the operation, unplug the power cord from AC outlet and contact your dealer for service.
P.E-8
P.E-9
P.E-8
P.E-9
Remove the water tank, and then pull out the water tray.
(This procedure should be done to prevent water leakage.)
Remove the panel and the pre-filter.
Remove the used filter.
Install a new filter
Take a new filter out of plastic bag and install it on the unit.
Install the fi lter so that the arrow “
↓
FRONT” on the fi lter side
face will face the panel.
Install the pre-filter.
Reinstall the panel on the unit.
Install the water tray, and then mount the water tank.
Filter
White face of
the filter should
face the front.
Filter
FRONT
When you remove the water tank, water may drip from the tank cap.
Lay a dry cloth before removing the water tank.
CAUTION
Use a genuine fi lter for the Hitachi Air Purifi er.
Other fi lters may cause unit failure.
CAUTION
T_S-EP-A5000.indd 22T_S-EP-A5000.indd 22 11/14/2011 1:58:38 PM11/14/2011 1:58:38 PM
Loading ...
Loading ...
Loading ...