Loading ...
Loading ...
Loading ...
31
After the initialization, the following factory settings will be restored:
Parameter Default Values
Speed 127 mm/sec (5 ips) (203DPI)
76 mm/sec (3 ips) (300DPI)
Density 8
Label Width 4” (101.5 mm)
Label Height 4” (101.5 mm)
Sensor Type Gap Sensor
Gap Setting 0.12” (3 mm)
Print Direction 0
Reference Point 0,0 (upper left corner)
Offset 0
Tear Mode On
Label Peeler Off Mode Off
Cutter Mode Off
Code Page 850
Country Code 001
Clear Flash Memory No
4.3.4 Media Sensor Calibration (For the Black Mark Sensor)
1. Turn off the printer.
2. Press and hold the Feed/Pause Button, and then turn on the printer.
3. Release the button after the green LED flashes five times and when the LED is lit in
green/amber.
Note
The LED color will change as follows:
Amber red (5 times) amber (5 times) green (5 times) green/amber (5 times)
red/amber (5 times) green (lit)
Loading ...
Loading ...
Loading ...