Loading ...
Loading ...
Loading ...
30
Dump mode
The printer will enter dump mode after printing the printer configuration. This mode allows users
to verify and debug the printer's programs. The characters in the left column are received from
the printer's system and those in the right column are their hexadecimal representation.
Note
Dump mode requires 4” (101.5 mm) wide paper.
To resume normal printing, turn the printer off and then on again.
4.3.3 Printer Initialization
Printer initialization clears the printer's DRAM and restores its factory settings.
To activate printer initialization:
1. Turn off the printer.
2. Press and hold the Feed/Pause Button, and then turn on the printer.
3. Release the button after the amber LED flashes five times and the LED is lit in green.
Note
The LED color will change as follows:
Amber red (5 times) amber (5 times) green (5 times) green/amber (5 times)
red/amber (5 times) green (lit)
ASCII data
Hexadecimal representation of
the ASCII data
Loading ...
Loading ...
Loading ...