Loading ...
Loading ...
Loading ...
17
BEFORE OPERATING
CLEAN THE OVEN BEFORE FIRST USE
•
Before operating your oven, make sure you read
and understand this operation manual completely.
•
Before the oven can be used, follow these procedures:
1. Place the drip tray correctly. See page 14.
2. See below for getting started.
3.
Follow directions on the right side for clean the
oven before fi rst use.
Your oven has an Energy Save Mode. This feature
saves electricity when the oven is not in use.
PROCEDURE
1
Open the door. The display will show “.0”.
2
Plug the oven into a approved outlet.
Nothing will appear on the display at this time.
Close the door.
Now the oven is ready to use.
3
CAUTION:
In Energy Save Mode the clock will not be displayed. In
Energy Save Mode, if you do not operate the oven for 3
minutes or more (i.e. after closing the door, or pressing
Stop/Clear, or at the end of cooking), you will not be able
to operate the oven until you open and close the oven door.
NOTE:
When you set Clock, Energy Save Mode will be cancelled.
1. Press Stop/Clear if you make a mistake during
programming.
2. Stop the oven temporarily during cooking.
3. Cancel a program during cooking, press twice.
You may detect smoke or a burning smell when using
the grill for the fi rst time, this is normal and not a sign
that the oven is out of order. To avoid this problem,
when fi rst using the oven, operate the grill without food
for 20 minutes.
PREPARATION
Ventilate the room.
PROCEDURE
1
Ensure that no food is in the
oven. Press Grill once.
Enter the time (20.00)
and Minute Plus/
START.
2
WARNING:
The oven door, outer cabinet, oven cavity and
especially the grill heating element will become hot.
TO SET THE CLOCK
* Suppose you want to enter the correct time of day.
(A.M. or P.M.)
PROCEDURE
1
Enter the correct time of day
by pressing the numbers in
sequence.
2
Press Info/Timer and
number 7 (In F7).
Press Minute Plus/START.
3
GETTING STARTED
STOP/CLEAR
NOTES:
1.
This is a 12 hour clock. If you attempt to enter an
incorrect clock time, “Err” will appear in the display.
Press the Stop/Clear and re-program the clock.
2. If the electrical power supply to the oven should be
interrupted, the display will intermittently show blank
after the power is reinstated. If this occurs during
cooking, the program will be erased. The time of day
will also be erased.
3. When you set Clock, Energy Save Mode will be
canceled.
SECAX1100Sen.inddSec1:17SECAX1100Sen.inddSec1:17 10.12.20:47:56PM10.12.20:47:56PM
Loading ...
Loading ...
Loading ...