Loading ...
Loading ...
Loading ...
7
use the OK button to confirm and move between fields.
• Time is set and displayed in a 24 hour format.
• After setting the date and time the bottom DD/MM/YY fields are used
to change format that the date will be displayed.
• Once the date and time have been set, the MENU button can be used
to save and exit back to the SETUP menu.
7. SET LOOP RECORDING:
Your DSH-440 has the ability to record in a Loop mode, which means
older blocks of video files will be overwritten once the memory card
becomes full. You can set the amount of video block time the DSH-440
will record for before a new video file is started.
To change the length of the videos that the DSH-440 records follow the
directions below:
• Use the MODE button to make sure you are in VIDEO mode (Video
camera icon will be displayed in the top left corner of the screen).
• Ensure you are not currently recording. If the red circle record indicator
is flashing at the top left of the DSH-440’s screen, push the OK button
to stop recording.
• Push the MENU button taking you to the VIDEO menu.
• Use the DOWN button to highlight the setting named Loop
Recording and push OK.
• Use the UP and DOWN buttons to highlight the required video length
(The OFF setting will record the longest possible loops keeping the file
size under 2GB, which is around 7 minutes at 1080P resolution).
• To confirm selection push the OK button, the DSH-440 will take you
back to the VIDEO menu.
8. SET G-SENSOR:
The G-Sensor monitors any unnatural bumps or shakes and logs the
associated footage as Locked ensuring any footage of potential crashes
is not recorded over with the regular loop footage.
To set the G-Sensor follow the directions below
• Use the MODE button to make sure you are in VIDEO mode (Video
camera icon will be displayed in the top left corner of the screen).
• Ensure you are not currently recording. If the red circle record indicator
is flashing at the top left of the DSH-440’s screen, push the OK button
to stop recording.
• Push the MENU button taking you to the VIDEO menu.
• Use the DOWN button to highlight the setting named G-Sensor and
push OK.
• Using the UP and DOWN button, highlight the required sensitivity
of the G-Sensor (2G is the most sensitive setting only requiring
small bumps to log footage as Locked, and 8G is the least sensitive
requiring a larger amount of activity to log footage as Locked).
• To confirm selection push the OK button, the DSH-440 will take you
back to the VIDEO menu.
Loading ...
Loading ...
Loading ...