Loading ...
Loading ...
Loading ...
8
Separate the inner and outer flue covers, and carefully
remove the protective coating from both. Carefully
reassemble the upper and lower flue covers sections by
sliding the inner into the outer flue cover. Carefully lower
the assembled upper and lower flue covers onto the
top of the rangehood body, and insert the flue cover
in approximately 5mm. Fix upper flue cover to the wall
mounting bracket with screws supplied. Ensure that
the upper section is extended.
IMPORTANT!
Care must be taken to ensure the screws are not cross
threaded when attaching the upper flue cover.
If installed in recirculating mode, insert the optional carbon
filter (included in recirculation kit AR610RK).
To complete the rangehood installation, insert the three
filters to the underside of the rangehood body. Place back
edge of filter into position and push up front edge so that
the filter clips into place. Your Electrolux rangehood is now
ready to use.
FLUE COVER INSTALLATION
Loading ...
Loading ...
Loading ...