Loading ...
Loading ...
Loading ...
7
Depending on the preferred installation/ducting mode,
follow step 6a or 6b below.
6a. Recirculating mode (Fig. D). Using the centre line,
secure the recirculating T-piece to the wall with suitable
screws/fixings (optional kit AR610RK). Install flexible
pipe between T-piece and the exhaust transition duct.
Use cable ties or suitable duct tape to secure flexible
pipe to T-piece and transition duct (Fig. F).
NOTE: When installed in recirculating mode, it is
recommended to use a carbon filter (included in
recirculation kit AR610RK) to prevent odours being
emitted back into the room.
6b. Ducted mode (Fig E.) The rangehood has been
supplied with flexible flue pipe and duct transition
piece, alternatively a 150mm diameter non-
combustible flue pipe can be used. Continue the
centre line to the ceiling. Fit preferred flue pipe to the
fan transition duct (Fig. F). Use cable ties or suitable
duct tape to secure flexible pipe to the transition duct.
NOTE: For ducted mode, we recommend extending
flue pipe through the roof to external “china hat” to vent
exhaust externally. We do not recommend venting into
ceiling cavity.
NOTE: To ensure optimum performance of the
rangehood, the use of rigid ducting is recommended.
The use of bends should be avoided. Rigid flexible
ducting is suitable, although loose flexible ducting is
unacceptable. All ducting must be fire retardant.
Fig. D Fig. E
Fig. F
Electrical connection
Check that the installation complies with the standards
of local building, gas and electrical authorities. Before
connecting to the mains supply ensure that the mains
voltage corresponds to the voltage on the rating plate
inside the rangehood.
Loading ...
Loading ...
Loading ...