Loading ...
Loading ...
Loading ...
6
1. Using a spirit level mark a vertical centre line on
the wall where the rangehood is to be positioned, and
a horizontal line at the base position (refer Fig. A).
NOTE: The height of the underside of the rangehood
body must be a minimum of 650mm* to a maximum
height of 800mm.
* If the instructions of the hob specify a greater distance
than the minimum above, then that shall be the minimum
height for installation.
2. Mark the location for flue cover wall mounting
brackets, rangehood mounting points and anti-tilt
fixing points above the rangehood using the
base as the reference point (Fig. A).
min. 650mm
max. 800mm
rangehood
mounting points
anti-tilt fixing point
hood
base
top
of hob
250mm
580mm
flue cover
wall mounting
brackets
ceiling
250mm
130mm
max. 1145mm
559mm
286mm
36mm
Fig. A
3. Install flue cover wall mounting brackets with suitable
fixings. Install suitable screws for rangehood mounting
points (to support a total weight of 30kg) to the wall as
marked (Fig. B).
Fig. B
4. Remove the protective plastic film from the rangehood
body and hang it on the mounting screws then secure
at the anti-tilt locations as indicated in Fig. B.
5. Fix exhaust transition duct using screws supplied (Fig. C).
Fig. C
RANGEHOOD INSTALLATION
Loading ...
Loading ...
Loading ...