Loading ...
Loading ...
Loading ...
Page |5
Information concerning disposal
Disposal of packaging
The packaging protects your appliance
from
damage
during transit. All utilized materials are
environmentally safe and recyclable. Please help us
by disposing of the packaging in an environmentally
friendly manner. Please ask your dealer or your local
authority about current means of disposal.
Disposal of your old appliance
Old appliances are not worthless rubbish! Valuable
raw materials can be reclaimed by recycling old
appliances.
WARNING:
1. Pull out the power plug.
2. Cut off the power cord and discard with the power
plug.
3. Remove the door from the appliance.
4. Do not allow children to play with the appliance
once it has spent its useful life. Danger of
suffocation!
Refrigerators contain refrigerant and gases in the
insulation. Refrigerant and gases must be recycled by
professionals. Ensure that tubing of the refrigerant
circuit is not damaged prior to proper disposal.
Installing the appliance
For detailed installation instructions, please refer
to the Installation Guide provided with the
appliance.
Have a qualified technician install and connect the
appliance according to the enclosed installation
instructions.
NOTE: For detailed installation instructions, relevant
measurements and information, please see the
Installation Guide provided with this appliance.
WARNING:
Do not install this appliance:
-
Outdoors
- In an environment with dripping water
- In rooms where there is a risk of frost
Transporting
The appliance is heavy and must be handled with
caution during transportation and installation.
Because of the weight and dimensions of the
appliance, at least two persons are necessary to move
the appliance into position securely and avoid injuries
to people or damage to the appliance.
Installation location
A dry, well ventilated room is suitable as
an
installation location. The installation location should
not be exposed to direct sunlight and not placed near
a heat source, e.g. a cooker, radiator, etc.
If installation next to a heat source is unavoidable, use
a suitable insulating plate or observe the following
minimum distance from the heat source:
▪
To electric or gas oven/range 1¼” (3 cm).
▪
To an oil or coal-fired cooker 11
13
/
16
” (30cm).
The floor of the installation location must not give
way; if required, reinforce floor. The appliance must be
upright and level to function correctly.
Ventilation
The refrigeration unit is ventilated only at the Toe-
Kick in the base. Never cover that area or place
anything in front of it. Otherwise the refrigeration
cooling performance will be affected and the unit must
work harder increasing power consumption.
Additionally, make certain all 4 leveling legs are
extended (unit height approximately 34 ¾ ”),sothat
there is sufficient airflow underneath the appliance.
Adjust all 4 legs to extend the appliance
height by approximately 1/2 inch.
Loading ...
Loading ...
Loading ...