Loading ...
Loading ...
Loading ...
Page |10
interior cabinet, or spill out from the bottom of the
cabinet.
3. Clean the appliance with a soft cloth, lukewarm
water and a little pH neutral detergent.
4. Wipe the drawer seals with clear water only and then
wipe dry thoroughly.
5. After cleaning switch the appliance back on.
3. To reattach the Toe-Kick, slide over the left and right
mounting brackets, such that bottom tabs of the Toe-
Kick rest on top of the bracket bases. This will allow
the Toe-Kick and mounting bracket screw holes
to
align.
Bracket
bases
Bottom
tabs
Cleaning the appliance
WARNING:
Never clean the appliance with a steam cleaner!
CAUTION:
• Do not use abrasive or acidic cleaning agents and
solvents.
• Do not use scouring or abrasive sponges. The
metallic surfaces could corrode.
• Never clean the glass shelves in the dishwasher. The
parts may be damaged.
Proceed as follows:
1. Before cleaning: switch the appliance off. For
instructions, see “Off Mode” section on the “Special
Functions” page.
2. Clean the appliance, and the glass shelves with a
soft cloth, lukewarm water and a little pH neutral
detergent.
CAUTION:
When rinsing the cabinet, water must not enter the
interior light recess located on the upper side of the
Cleaning behind the Toe-Kick
1. Before cleaning: switch the appliance off.
2. Remove the Toe-Kick. See “Toe-Kick” section on
the previous page.
WARNING:
Do not remove the electrical box cover behind the
Toe-Kick. Risk of electric shock!
3. Use a vacuum cleaner with an extended attachment
to clean the accessible areas when they are dusty or
dirty.
4. Replace the Toe-Kick.
5. Switch the appliance on.
Odors
If you experience unpleasant odors:
1. Switch the appliance off.
2. Take all food and beverages out of the appliance.
3. Clean the interior. See “Cleaning the appliance”.
4. Clean all containers.
5. Switch the appliance on again.
6. Check whether the formation of odors is still
occurring after 24 hours.
Light (LED)
Your appliance features a maintenance-free LED light
located at the top of the interior cabinet and under the
mullion. This light must be repaired by authorized
technicians only.
Tips for saving energy
• Install the appliance in a dry, well ventilated room.
The appliance should not be installed in direct sunlight
or near a heat source (e.g. radiator, cooker).
If required, use an insulating plate.
• Do not block the ventilation openings in the
appliance.
• Open the appliance door as briefly as possible.
Loading ...
Loading ...
Loading ...