Loading ...
Loading ...
Loading ...
./..
PRACTICAL INFORMATION
Drive immediately for approximate-
ly three miles (fi ve kilometres), at
reduced speed (between 15 and
35 mph [20 and 60 km/h]), to plug
the puncture.
Stop to check the repair and the tyre
pressure using the kit.
Turn the selector A to the AIR position.
Connect the black pipe D to the
valve of the wheel.
Switch on the compressor by moving
the switch B to position "1" until the
tyre pressure reaches 2.0 bars.
Remove the kit, taking care to avoid
staining your vehicle with traces of
fl uid. Keep the kit to hand.
If after around 5 to 7 minutes
the pressure is not attained,
this indicates that the tyre is
not repairable; contact a PEUGEOT
dealer for assistance.
Checking tyre pressures/
infl ating accessories
You can use this kit to infl ate
other accessories such as a ball or
bicycle tyres.
To do this, turn the selector to the
"Infl ation (AIR)" position, connect the
black pipe with the appropriate adap-
tor to the accessory to be infl ated,
then follow the rest of the procedure
below as far as removal of the kit.
You can also use this kit for routine
checking and adjustment of the tyre
pressures on your vehicle. For this,
carry out just the following 6 points.
Loading ...
Loading ...
Loading ...