Loading ...
Loading ...
Loading ...
FITTINGS
109
High load retaining net
To use it in row 1:
fold the rear seats,
open the covers of the upper fi xings 1 ,
unroll the high load retaining net,
position one of the ends of the net's
metal bar in the corresponding upper
fi xing 1 , then do the same with the oth-
er end,
slacken the straps fully,
fi x the snap hook of each of the
straps on the corresponding Top
Tether ring 3 (located on the back of
the folded rear side seats),
tighten the straps,
check that the net is hooked and
tightened correctly.
To use it in row 2:
roll up or remove the load space
screen,
open the covers of the upper fi xings 2 ,
unroll the high load retaining net,
position one of the ends of the net's
metal bar in the corresponding up-
per fi xing 2 , then do the same with
the other end,
fi x the snap hook of each of the
straps in the corresponding stowing
ring 4 ,
tighten the straps,
check that the net is hooked and
tightened correctly.
When positioning the net, check
that the strap loops are visible
from the boot; this will make
slackening or tightening easier.
Hooked onto the special upper and lower
fi xings, this permits use of the entire loading
volume up to the roof:
- behind the front seats (row 1) when
the rear seats are folded.
- behind the rear seats (row 2).
Loading ...
Loading ...
Loading ...