Loading ...
Loading ...
Loading ...
11
49-60796-1
REVERSE DOOR SWING
Left/Right Door Opening Method
This product allows you to reverse the door opening from left to right and back.
You can select your preference of door opening by following the procedure to
make the change.
Tools Required
Phillips and Flat Head Screwdrivers, Ratchet Wrench with 8 mm and 10 mm
sockets.
Dismantling
1. Affix refrigerator and freezer door by sticking adhesive
tape on both sides to hold doors in place.
2. As shown in Fig. 2, remove the upper hinge cover by using
flat head screwdriver. Then remove three screws using
ratchet wrench with 10 mm head. Take out hinge by
pulling it vertically and keep it in safe place. Remove the
top hinge plug from the opposite side of the cabinet top.
3. Remove the adhesive tape on freezer door, lift it and take
off the door and carefully put it aside.
4. Remove two screws of middle hinge using ratchet wrench
with 8 mm socket, and keep them in a safe place (Fig. 3)
5. Remove the adhesive tape on refrigerator door, lift it and
take refrigerator door, and carefully put it aside.
6. Remove the doorstoppers from the
refrigerator and freezer doors. (Fig. 4)
7. Insert left side doorstoppers (provided
in your packing) on the left side bottom
hole of the refrigerator door and on
the left side bottom hole of the freezer
door. Fasten with screws provided.
(Fig. 5)
ENGLISH
INSTALLATION INSTRUCTIONS
WARNING
Follow all steps when reversing the door swing. Failure to
follow these instructions, leaving off parts, or overtightening screws, can lead to
the door falling off and result in injury and property damage.
Fig. 2
Fig. 3
Fig.
4
Fig.
5
Loading ...
Loading ...
Loading ...