Loading ...
Loading ...
Loading ...
9
8. Attach the range hood assembly to the lower vertical
supports with 2 leveling screws and 2 nuts.
9. Install the 4 lower vertical supports with 16 - 4.2x8 mm
screws. Make sure all screws are securely tightened
Make Electrical Connection
1. Disconnect power.
2. Remove terminal box cover.
3. Remove the knockout in the terminal box, and then install a
UL listed or CSA approved 1/2" (12.7 mm) strain relief.
A
B
C
D
A. 2 - Leveling screws
B. Lower vertical support
C. Place leveling screws
through the structure
D. Nut
A
B
A. 4 - Lower vertical supports
B. 16 - 4.2 x 8 mm screws
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
A
C
B
A. Knockout
B. Terminal box
C. Terminal box cover
Loading ...
Loading ...
Loading ...