Loading ...
Loading ...
Loading ...
11
3. Slide the upper duct covers up the frame to the ceiling, and
then secure to the upper horizontal support with 2 - 3.5 x 6.5
mm screws.
4. Place the long end of the plastic clips (2) into the bottom of
the front lower duct cover.
5. Install the lower duct cover (front) to the range hood canopy.
Spread the lower duct cover opening slightly and position it
over the upper duct cover. Set the lower duct cover in place.
Position so the anges of the lower duct cover set into the
anges of the upper duct covers.
6. Install the lower duct cover (rear) to the range hood canopy.
Spread the lower duct cover opening slightly and position it
over the upper duct cover. Set the lower duct cover in place.
Position so the anges of the lower duct cover set into the
anges of the upper duct cover. Make sure the front and rear
lower duct covers mate properly.
NOTE: When assembling the rear lower duct cover to the
front lower duct cover, the ange (both sides) must be placed
over the plastic clip to secure the lower duct covers together
at the bottom.
7. Secure the lower duct covers together at the top using
plastic clips (2). Use one plastic clip on each side.
B
C
A
D
A. 3.5 x 6.5 mm screw
B. Slotted holes (2)
C. Upper duct covers
D. Ceiling
B
A
A. Lower duct cover - (front)
B. Plastic clips (2) (long end for front placement)
A
B
D
C
A. Range hood canopy
B. Plastic clips
C. Lower duct covers
D. Upper duct covers
A
B
D
C
A. Lower duct cover (rear)
B. Plastic clips
C. Lower duct covers
D. Upper duct covers
A
B
A. Plastic clips (2)
B. Lower duct covers top clip area
Loading ...
Loading ...
Loading ...