Loading ...
Loading ...
Loading ...
Operating 61
Operating
3
Standby mode
The speaker switches to the standby mode if there is
no music playback or no button operation.
Standby mode
Option 1.
If network is disconnected and there is no music
playback and no button operation for 15 minutes,
the speaker switches to the standby mode. Then
“GOOD-BYE” appears on the display window and the
LED indicator on the unit turns red.
Option 2.
If you press and hold
1
on the unit or
1
on the
remote control for about 3 seconds, the speaker
switches to the standby mode. Then “GOOD-BYE”
appears on the display window and the LED indicator
on the unit turns red.
Network standby mode
Option 1.
When network is connected but music is not played
and buttons are not pressed for 15 minutes, the
speaker switches to the network standby mode.
Then the LED indicator on the unit becomes dimmed
in white.
Option 2.
If you press
1
on the unit or
1
on the remote
control, the speaker switches to the network standby
mode. Then the LED indicator on the unit becomes
dimmed in white.
BLUETOOTH standby mode
If the Bluetooth standby mode is set to ON, the
speaker switches Bluetooth standby mode when is
turned off.
When you turn on the main unit in the Bluetooth
standby mode, Bluetooth and LG TV are able to
connect even if network is not connected.
Adjust volume level of the unit to minimum. And
then, press and hold VOL - on the unit and INFO on
the remote control for about 3 seconds. You can see
“ON-BT STANDBY” and the unit switches Bluetooth
standby mode.
To cancel this function, press INFO while “ON-BT
STANDBY” is scrolled.
y
If you turn off the unit in the WI-FI function,
Bluetooth standby mode does not operate.
y
To use this function, you should turn on the
AUTO POWER function.
,
Note
Reset the Speaker
If the speaker is not turned on or doesn’t respond,
reset the speaker.
Resetting the speaker
y
Press and hold the button until you hear the
beep sound once. You can see “DISABLED” on the
display window. Then all wireless network ports
are deactivated and the stored wireless network
information is deleted.
y
Press and hold the
button until you hear the
beep sound twice. You can see “RESET” on the
display window. You can reset the speaker to its
original factory settings.
Loading ...
Loading ...
Loading ...