Loading ...
Loading ...
Loading ...
English - 19English - 19
Other reasons why a cooking zone will switch itself o
All cooking zones will switch themselves o if liquid boils over and
lands on the control panel.
The automatic shuto will also be activated if you place a
damp cloth on the control panel. In both of these instances,
the appliance will need to be switched on again using the main
On/O control sensor after the liquid or the cloth has been
removed.
RESIDUAL HEAT INDICATOR
When an individual cooking zone or the hob is turned o, the
presence of residual heat is shown with an , (for “hot”) in the
digital display of the appropriate cooking zones. Even after the
cooking zone has been switched o, the residual heat indicator
goes out only after the cooking zone has cooled.
You can use the residual heat for thawing or keeping food warm.
As long as the residual heat indicator is illuminated, there is a
risk of burns.
If the power supply is interrupted, the , symbol will go out
and information about residual heat will no longer be available.
However, it may still be possible to burn yourself. This can be
avoided by always taking care when near the hob.
TEMPERATURE DETECTION
If for any reason the temperatures on any of the cooking zones
were to exceed the safety levels, should this happen then the
cooking zone will automatically reduce to a lower power level.
When you have finished using the hob, the cooling fan will
continue to run until the hob’s electronics has cooled down. And
the cooling fan switched itself o depending upon the temperature
of the electronics.
WARNING
WARNING
04 PARTS AND FEATURES
(Best)NZ84F7NC6AB_EU_DG68-00545A-02_EN.indd 19 27/03/2015 11:21:31
Loading ...
Loading ...
Loading ...