Loading ...
Loading ...
Loading ...
22
CARE AND CLEANING
Replacing the Oven Light
The interior oven lights are located at the rear of the oven
cavity and are covered with a glass shield. The glass shield
must be in place whenever the oven is in use (See
Figure 10).
To replace the oven interior light bulb:
1. Turn electrical power off at the main source or unplug
the appliance.
2. Remove interior oven light shield by turning a quarter
turn counter-clockwise.
3. Replace bulb with a new T-4 type Halogen 25 watt
appliance bulb.
4. Replace glass oven light shield by rotating clockwise.
5. Turn power back on again at the main source (or plug
the appliance back in).
6. Be sure to reset the time of day on the clock
Remove and replace storage drawer (some
models)
Use the storage drawer for storing cooking utensils. The
drawer can be removed to facilitate cleaning under the
range. Use care when handling the drawer.
To remove the drawer:
1. Pull empty drawer out until it stops.
2. Tilt up the front of the drawer up and pull it out over the
glide stop.
To replace the drawer:
1. Insert the back of the drawer into the opening.
2. Lift up the drawer and line up the drawer supports with
the rails. Make sure to clear the glide stop.
3. Push in the drawer until it stops.
Be sure the oven is unplugged and all parts are cool
before replacing oven light.
Do not allow your fingers to touch the new bulb when
replacing. This will shorten the life of the bulb. Use a
paper towel or cotton glove while handling the new bulb
when installing.
Figure 10: Wall oven Halogen light
CAUTION
NOTE
Loading ...
Loading ...
Loading ...